Fill-dirt in Valley Mills, TX

Typical delivered prices for basic fill-dirt in small Texas towns like Valley Mills usually fall in a broad range because of local sourcing and distance to quarries. Expect approximately $18 to $40 per ton delivered for standard fill-dirt, though jobs with long haul distances, specialty screening, or next-day delivery can be higher. Contact Hello Gravel with your zip code for an exact local quote.

Hello Gravel connects you with local suppliers and haulers that serve the Valley Mills area rather than a single quarry. Common local sources include nearby pits, roadwork stockpiles, and regional quarries; availability varies with season and local projects. Enter your zip code on our site or call our team to see the specific suppliers serving your address and get a firm price and delivery window.

Standard delivery is typically 2 or more business days; next-day delivery is sometimes available for orders placed before noon CST for an extra fee. Deliveries are made by contracted dump truck fleets (usually tri-axle), with a 3-ton minimum order. Note that drivers may be able to perform tailgate spreading at their discretion, but spreading is not guaranteed.

Volume depends on the depth you need. For example, raising a 1/4 acre (10,890 sq ft) by 6 inches requires about 200 cubic yards, which converts to roughly 280 to 320 tons of fill-dirt depending on moisture and material density. For an accurate estimate for your project, use Hello Gravel’s calculator or contact our team with your desired depth.

A standard 2-car driveway around 20 ft by 40 ft equals about 800 sq ft. For 4 inches of fill you’ll need roughly 10 cubic yards (about 12 to 16 tons); for 6 inches expect about 15 cubic yards (roughly 18 to 24 tons). These are estimates—soil density, compaction needs, and whether you add a stone base will change the final tonnage.

Yes. The local hot, often dry climate can make fill-dirt dusty and prone to shrinkage if placed and left loose, while occasional heavy rains can cause settlement. To get long-term stability, moisture conditioning and compaction during installation are important, and cover or seed exposed areas to reduce erosion and dust.

Most local contractors recommend compaction for any structural use of fill-dirt; loose fill will settle over time and can undermine driveways or pads. For driveways or building pads, contractors commonly place a compacted granular base (crushed stone) and sometimes a geotextile fabric to separate poor soils from the base; always verify with your contractor and consider a soil test if the site has organic or highly variable soils.

Dump trucks typically need a clear path, about 12 to 14 feet wide and adequate vertical clearance; soft or steep access may prevent a truck from dumping in the ideal spot. If access is limited, plan for a shorter haul from the street to the placement area, request driver notes at checkout, and tell Hello Gravel about gates, overhead lines, or tight turns when you order so we can coordinate with the hauler.