Fill-dirt in Gaston, SC

Delivered fill-dirt prices in the Gaston area usually range from about $10 to $30 per cubic yard delivered, depending on distance, supplier, and whether the material is screened or contains clay. Many suppliers price by the cubic yard rather than the ton; if you need a ton estimate, one cubic yard of fill-dirt is roughly 1.1 to 1.3 tons depending on moisture. For an exact quote check your zip code on our site or contact our team for local pricing.

Hello Gravel requires a 3-ton minimum order; many local suppliers servicing Gaston follow similar minimums (often 3 to 5 tons). Short local hauls within the supplier’s service area may have free or low-cost delivery, while long-haul deliveries can add $50 to $150 or more; exact fees depend on supplier location and truck access at your site.

Fill-dirt can be used to raise grade but is not always the best choice for structural subgrades; for driveways and foundations in Gaston’s wet, humid climate and clay-prone soils, contractors typically prefer a granular base (crushed stone) or engineered fill. If you use fill-dirt, remove organic material, place in 6- to 8-inch lifts, and compact each lift with a plate or roller to about 90-95% of the standard Proctor density or to a contractor-specified compaction level.

Use cubic yards = area (sq ft) × depth (ft) ÷ 27. For 500 sq ft: 1 inch = ~1.54 yd3 (~1.85 tons), 2 inches = ~3.09 yd3 (~3.70 tons), 3 inches = ~4.63 yd3 (~5.56 tons), 6 inches = ~9.26 yd3 (~11.11 tons). For 1,000 sq ft double those amounts (e.g., 6 inches ≈ 18.52 yd3 or ~22.22 tons). Densities vary with moisture and composition, so use these as estimates and check our material calculator for a tailored number.

For bulk grade raising and non-structural landscape fills, fill-dirt is cost-effective in Gaston. For driveways, patios, or under foundations where drainage and stability matter in our hot, humid and occasionally wet conditions, crushed stone or a mixed granular base is usually better because it sheds water and compacts predictably. Consider using fill-dirt to build general grade, then cap with a granular layer for load-bearing surfaces.

Yes. Hello Gravel partners with local suppliers and haulers around Gaston to source fill-dirt that reflects local geology. Enter your zip code on our site or contact our sales team and we’ll match you with nearby suppliers and provide delivered pricing and delivery windows.

Contractor labor rates in the Gaston area vary but a typical range is $45 to $85 per hour per worker, with equipment costs for a skid steer or mini-excavator often $150 to $350 per day. Many contractors will price small spreading-and-compaction jobs as a flat fee per cubic yard (commonly $6 to $15/yd3) or a minimum job charge; get multiple estimates and confirm whether compaction testing or traffic-bearing compaction is included.

Loose fill-dirt is prone to erosion on sloped yards, especially during Gaston’s heavy summer rains. For slopes steeper than about 2:1 (horizontal:vertical) or where runoff concentrates, add erosion controls such as seed and mulch, sod, erosion control matting, terraces, or geotextile fabric; inspect after storms and re-seed or add surface protection as needed.

Permit requirements vary by project size, location, and whether the work affects drainage or wetlands. For large fills, grading near streams, or projects that change site drainage in Gaston, contact the Town of Gaston or the county building and planning department to confirm local rules and any required permits before importing material.

Common concerns are cost, compaction reliability, drainage, and longevity. Balance price with performance: inexpensive fill-dirt may save money up front but needs proper removal of organics and adequate compaction and surface drainage to avoid future settling or wet spots; ask suppliers about material type and plan for a granular cap or geotechnical guidance for load-bearing work.