Fill Dirt in Narragansett Beach, RI

Delivered fill-dirt prices in the Narragansett Beach area typically fall in a wide range because of material quality and trucking logistics; expect roughly $15 to $45 per ton delivered as a general ballpark. Hello Gravel has a minimum order of 3 tons and may add delivery or access surcharges for tight coastal lots; final price depends on availability, distance from supplier, and any special placement needs.

To calculate volume multiply area by depth in feet: 1,000 sq ft x 0.5 ft = 500 cubic feet, divided by 27 gives about 18.5 cubic yards. Fill-dirt in this region typically weighs around 1.1 to 1.3 tons per cubic yard, so 18.5 cu yd is roughly 20 to 24 tons; order a little extra to allow for settlement and compaction.

Some local suppliers and contractors in the West Rhode Island area do offer screened material and compaction/installation as add-on services, but availability varies by supplier. Hello Gravel can connect you with suppliers; request screened/engineered fill and note compaction or grading needs at checkout, but expect that spreading and compaction may require a separate contractor or coordination since driver tailgate spreading is at their discretion and not guaranteed.

Fill-dirt is useful for raising grade and backfilling, but in sandy coastal soils and freeze-thaw zones it must be well-compacted and properly drained to avoid long-term settling and frost heave. For driveways and structural backfill near Narragansett Beach we recommend using well-graded, non-organic fill in thin lifts with compaction, and combining it with a crushed-stone base or geotextile as appropriate; consult an engineer for foundation backfill near high groundwater or salt exposure.

Possibly. Coastal areas like Narragansett often trigger local and state regulations: check with the Town of Narragansett Building and Zoning departments and Rhode Island agencies such as the Coastal Resources Management Council and RIDEM before doing significant grading. Small, minor fills may be allowed, but larger changes to elevation, shoreline, wetlands, or drainage typically require permits and possibly a coastal or wetlands review.

Fill-dirt is an economical choice for bulk raising of grade but usually drains more slowly and can contain fines that hold water; it is not ideal as a finished driveway surface. Crushed stone is better for structural driveway bases and drainage, sand can be useful for leveling in beach settings, and topsoil is for planting; many beachfront projects use fill-dirt for bulk elevation and then a crushed-stone layer plus geotextile for a durable, well-draining surface.

Typical deliveries use tri-axle dump trucks which need enough turning radius, overhead clearance, and a place to offload. Expect extra charges or limitations when access is tight (narrow streets, steep driveways, on-street parking restrictions, or proximity to the beach), and allow time to arrange permits if the truck will block a public road or sidewalk; sending photos and clear delivery notes when ordering helps the carrier plan and avoid surprises.

Newly placed fill-dirt often settles during the first winter and after heavy rains, so plan to inspect and top up low spots within the first year. Common maintenance includes regrading settled areas, adding material to restore grade, installing erosion controls (silt fences, riprap, or vegetation), and checking drainage after storms; for driveways you may need to add or recompact material every few years depending on traffic and exposure to coastal weather.