Fill Dirt delivery in Bend, OR

Hello Gravel requires a 3-ton minimum order. Delivery costs in Bend vary with supplier, distance, and site access; many customers see free or low-cost delivery while remote or difficult-access jobs incur higher fees. Get an exact price by entering your zip code and requesting a local quote.

A good rule of thumb is 1 cubic yard of fill-dirt weighs about 1.3 to 1.5 tons depending on moisture and composition, so use 1.4 tons per cubic yard as an estimating figure. For example, 10 cubic yards is roughly 14 tons; always order a little extra to allow for compaction and settling.

Possibly. City of Bend and Deschutes County have grading, stormwater, and building rules that can affect projects, especially for site grading, drainage changes, or foundation backfill. Before large fills or any structural backfill, check with City of Bend Community Development or Deschutes County Permits and consider an engineer's recommendation.

Bend's high-desert climate means hot, dry summers and cold winters with freeze-thaw cycles that can cause settling or heaving if material is not properly compacted and drained. Use compacted lifts, control moisture during placement, and provide positive drainage to reduce long-term movement and erosion.

Contractors in the Bend area often prefer crusher run, road base, or compacted gravel mixes for driveways because those materials compact tightly and shed water better than loose fill-dirt. Decomposed granite can work for low-traffic or decorative driveways but may need stabilizers for heavier use.

Tailgate spreading may be offered by drivers at their discretion, but paid spreading or machine work usually costs extra; small jobs often run $100-$400 and larger or harder-to-access jobs cost more. Renting a plate compactor in Bend is commonly $80-$300/day, while contractor labor for full compaction can range from a few hundred to over $1,000 depending on scope.

For slope stability, local landscapers favor well-graded, compactible fill with a mix of particle sizes and low organic content rather than pure sand or clay. On moderate to steep slopes, adding a coarser granular layer, terraces, or geotextile fabric and vegetation is recommended to reduce erosion and settling.

Yes—some local suppliers can provide lab test results, proctor/density reports, or written material descriptions on request. For foundation backfill or drainage applications, many builders request 'engineered fill' or specific compaction testing; ask your supplier or Hello Gravel to arrange documentation before delivery.

Maintenance depends on use and drainage; light yard fill may settle and need topping or regrading every 1-3 years, while driveways or high-traffic areas require more frequent attention unless proper base material and compaction are used. Small regrades or top-offs often cost a few hundred dollars, while larger repairs or rework with additional material and compaction can run into the low thousands.

Yes. Deschutes County and the City of Bend enforce erosion and stormwater controls for development and large earthwork, and these rules can dictate sediment control, revegetation, and permitted disturbance limits. Check local regulations early, and plan for silt fencing, mulching, or other erosion controls when placing fill on slopes or near waterways.

Mark the delivery spot clearly, remove obstacles, and call 811 to locate underground utilities before any digging or machine work. Make note of access, gate width, and slope in your order notes so the supplier can size the truck correctly, and request spreading or other services at checkout if needed (these are at the driver's discretion or may incur additional fees).