Fill Dirt in Jenks, OK

Delivered fill-dirt in Jenks typically runs in the range of about $12 to $30 per ton, depending on load size, moisture content, and supplier distance from your address. Hello Gravel has a minimum order of 3 tons, so check your zip code for exact pricing and get a quote for the most accurate rate.

A 20x20 area at 4 inches is about 4.9 cubic yards (roughly 400 sq ft x 0.33 ft). Using a typical fill-dirt density (about 1.2–1.4 tons per cubic yard) you will need roughly 6 to 7 tons. Order 10–20% extra to allow for compaction and grading, and remember Hello Gravel minimums when placing your order.

For driveway bases in Jenks, a low-organic, compactable fill with a mix of fines works better than loose sandy fill. Pure fill-dirt is good for bulk raising and rough grading, but for the finished base use a well-graded structural fill or crushed stone on top of compacted fill. Local suppliers can often provide a select or structural fill option if you need a more stable base.

Most contractors in the Jenks area recommend compacting fill-dirt in 4–6 inch lifts with a plate compactor or roller to achieve stability. Mixing in fines or using limestone screenings can improve surface stability, but screenings create a harder surface and may not be appropriate everywhere; discuss the intended use with your contractor before adding a binder.

Hello Gravel's platform generally lists a 3-ton minimum order (about 2.5–3 cubic yards depending on soil). Some local suppliers or landscape yards in the Jenks area may offer 1–5 yard bobcat or small-load deliveries, but availability and pricing vary by supplier and truck type — check your zip code and request a small-load option when you get a quote.

Jenks sees occasional winter freezes and heavy summer rains, both of which can cause settling, washouts, or soft spots in poorly compacted fill-dirt. To reduce problems, compact in lifts, provide proper surface grading and drainage, and cap fill with topsoil or erosion control measures where vegetation is planned.

For raising grade and filling low spots, fill-dirt is usually the best choice because it is inexpensive and designed for structural fill. Topsoil is better for seeding and planting because it contains organic matter, and sand is better for drainage but can shift. A common approach in Jenks is to bulk-fill with fill-dirt and then cap with 4–6 inches of topsoil where you will plant.

Hello Gravel requires a minimum order of 3 tons and offers standard delivery in 2+ business days in many areas, often with no extra delivery fee inside the service area. Next-day delivery is available for orders placed before noon CST for an additional fee, and remote addresses or very small loads may incur extra charges — get a quote to see exact fees for your address.

Fill-dirt is not recommended as the finished base under concrete slabs or pavers because it can settle and shift. For pavers and slabs, use a properly compacted crushed stone or class II base over a compacted subgrade; fill-dirt can be used as compacted subgrade material behind or beneath the engineered base but not as the structural base itself.

If fill-dirt is placed and mechanically compacted in proper lifts, it can reach usable density quickly and you can proceed with landscaping or light surfacing within days to a few weeks. Natural settlement can continue for months, especially after heavy rain, so allow extra time before building heavy structures and consult a geotechnical engineer for foundations or load-bearing work.