Fill Dirt in White Lake, NC

Delivered fill-dirt prices in the White Lake area typically range from about $10 to $30 per ton depending on local supplier rates, truck access, and how far the material travels. Small orders and tight drop locations push costs higher, while larger orders within the supplier’s service area get the best per-ton pricing. Contact our team to check exact pricing and any free-delivery thresholds for your zip code.

Use this quick method: cubic yards = (area in sq ft x depth in ft) / 27, then multiply cubic yards by about 1.2 to convert to tons for typical fill-dirt. Example: 1,000 sq ft raised 6 inches is about 18.5 yd3 or roughly 22 tons; the same area raised 1 foot is about 37 yd3 or 44 tons. For larger areas scale the same way and contact us if you want a free materials estimate for your exact dimensions.

Fill-dirt is fine for general grading and raising yard elevations, but for driveways, RV pads, and septic pads you usually want a more structural, well-graded material (crushed stone or crusher-run) or engineered fill. For backfill around foundations you should use low-organic, compactable fill that meets your engineer’s spec; avoid using loose topsoil or un-screened organic material. If you’re unsure, our team can recommend the best aggregate for the specific application and local soil conditions.

For structural work aim for compaction of around 90–95% of standard Proctor; achieve this by placing fill in 4–8 inch lifts and compacting each lift. Small areas can be compacted with a heavy vibratory plate compactor or jumping jack, while larger jobs typically require a small roller or vibratory drum. Because Bladen County soils can include clay and sandy mixes, proper lift thickness and moisture control are important for consistent compaction.

White Lake’s frequent rain and occasional freeze-thaw cycles can slow compaction, cause temporary saturation, and increase settlement if material or installation are not managed. Good grading, drainage (slope away from structures), and placing fill when soils are not overly wet reduce long-term problems. For lakeside fills, consider extra drainage measures, geotextile, or engineered fill to limit erosion and settlement.

Common local alternatives include crusher-run (well-graded crushed stone that compacts well), bank-run gravel (natural mixed material), and sand. For lakeside yards, crusher-run is often best because it compacts and sheds water; sand drains well but won’t support loads and can erode, while plain fill-dirt may retain water and settle more. Choose based on whether you need structural support, drainage, or a top dressing for landscaping.

Labor and placement rates vary, but a rough range in the White Lake area is $40 to $100 per hour for a two-person crew, or $8 to $20 per cubic yard for delivery plus basic spreading depending on job complexity. Small jobs with tight access and hand spreading cost more per yard; large projects with machine spreading lower the per-unit cost. Always get written quotes that list material, delivery, spreading, compaction, and any site-prep or disposal fees.

Possibly. Any grading or land-disturbing activity near shorelines, wetlands, or over 1 acre usually triggers state and county requirements: check Bladen County planning and the North Carolina Department of Environmental Quality (DEQ) for erosion and sedimentation control, and the Army Corps if wetlands are involved. For lakeside work you may also need shoreline or riparian permits, silt fencing, and coordinated erosion control; contact local authorities before work starts to confirm permit needs.

Order at least our 3-ton minimum and plan deliveries for dry weather when possible; standard delivery takes 2+ business days and next-day delivery is available for orders placed before noon CST for an extra fee. Add clear drop-location instructions and gate access notes in Order Notes, request tailgate spreading at checkout if desired (driver discretion), and call our team if you need help selecting a more structural material for driveways or lakeside fills.