Fill Dirt in Belwood, NC

Delivered fill-dirt prices in the Belwood area typically run in the range of about $20 to $45 per cubic yard, depending on distance, truck access, and local supplier inventory. Rural deliveries or sites with tight access can push the price higher, so get a zip-code-based quote for the most accurate number.

A single 10-yard dump typically costs roughly $250 to $700 delivered in the Belwood area, depending on material quality, haul distance, and any fees for off-road or tight access. That range assumes standard dump-truck delivery and no specialized spreading or compaction services.

Across the broader North Carolina region, a typical 10–12 yard load of basic fill-dirt is often between $250 and $800 delivered, with urban areas or longer hauls toward the upper end. Hello Gravel’s quoted price will reflect supplier location, local fuel/haul fees, and whether the truck must negotiate steep or narrow driveways.

To cover 1,000 sq ft you need about 6.2 cubic yards for 2" depth and about 9.3 cubic yards for 3" depth. At an estimated delivered price of $20 to $45 per cubic yard, expect a total of roughly $120 to $420 for 2" and $185 to $420 for 3"; final costs vary by supplier and delivery distance.

One ton of fill-dirt is roughly 0.7 to 0.8 cubic yards, which will cover about 125 sq ft at 2", about 83 sq ft at 3", or about 62 sq ft at 4". Delivered prices per ton in the Belwood area typically translate to about $15 to $35 per ton as a rough estimate, but check your zip code for exact pricing.

Yes: fill-dirt is generally cheaper than crushed gravel because it is unprocessed subsoil. Use fill-dirt when you need to raise grades, backfill foundations, or build up low spots; choose gravel when you need drainage, a stable base for driveways, or surface material that resists erosion and rutting.

Fill-dirt is not a substitute for crushed stone or gravel bases and is not suitable as a structural 'poor man’s concrete' because it typically contains fines and organic material that compress and shift. Local suppliers can deliver crushed stone or rock-base mixes used for bases, but fill-dirt should be used for non-structural fill and grade work; request base material if you need a driveway subbase.

Hello Gravel’s minimum order is 3 tons, and many local suppliers will deliver short loads but may charge a short-load fee or higher per-ton price to cover truck costs. Small or remote deliveries to Belwood can incur extra fees, so request a quote for your exact address to see whether a short-load delivery is available and what the fee will be.

A proper quote should list the material type (fill-dirt), quantity in cubic yards and tons, delivery/haul charges, dumping location instructions, any short-load or access fees, taxes, and whether tailgate spreading is requested (drivers may provide it at their discretion). Removal of existing material, spreading, and compaction are typically not included unless specifically added to the job quote.

Belwood and much of the North Carolina region often have clay-rich subsoils and seasonal moisture swings, which affect drainage and compaction. Expect to compact fill-dirt in lifts and consider geotextile fabric or gravel if you need improved drainage or a stable base; consult with your contractor or Hello Gravel’s team for supplier recommendations in your area.

Drivers may be able to perform tailgate spreading at their discretion, but Hello Gravel does not guarantee spreading services. If you want spreading, request it at checkout or call our team; the driver will assess safety and feasibility on arrival, and additional labor or fees may apply.