Fill Dirt in Goshen, IN

Delivered fill-dirt in Goshen commonly ranges from about $10 to $25 per ton, or roughly $12 to $30 per cubic yard. Final price depends on material quality (clean fill vs. dirt with more fines), local supplier availability, truck access, and delivery distance; use Hello Gravel's quote tool or call our team for a location-specific estimate.

To raise 1,000 sq ft by 6 inches you need about 18.5 cubic yards (1,000 sq ft x 0.5 ft ÷ 27). That equals roughly 21 to 25 tons of fill-dirt in Goshen depending on moisture and compaction; we recommend ordering 5-15% extra to account for settling and placement losses.

No—fill-dirt is not the best surface or base for a driveway. It is useful to raise grade or build subgrade but lacks the angular rock and drainage properties of crusher run or road base, which are preferred for driveway stability and long-term wear in Goshen's climate.

Fill-dirt can compact well if placed in thin lifts and mechanically compacted, but its resistance to frost heave depends on particle size and drainage. Fill-dirt with high silt or clay content can hold water and be prone to frost heave; for critical grades or structures, consider engineered fill or improved drainage and compaction procedures.

For structural or foundation work you should plan on compaction testing and follow engineer recommendations. Geotextile fabric can help separate poor soils from structural fill and improve stability in some situations; contact a local engineer and tell Hello Gravel the project use so we can help match materials and delivery options.

Hello Gravel connects you with trusted local suppliers and haulers that serve Goshen and the surrounding West Indiana area. Minimum order sizes commonly start at our platform minimum of 3 tons, with tri-axle truck deliveries being typical; availability and exact supplier names vary by zip code, so check your address on our site or call for supplier details.

A properly placed and compacted layer of fill-dirt can be stable for many years, but expect some settlement during the first year as the soil consolidates. If used as finished grade and not covered with topsoil or vegetation, you may need to add a small top-up after heavy settling or erosion events; good compaction and surface protection (seed/mulch) reduce maintenance needs.

Local rules in Goshen or Elkhart County may apply when changing lot grade or altering drainage patterns; permits are sometimes required for significant grading or fill that affects neighboring properties or stormwater. Check with Goshen city engineering or the county building department before placing large volumes of fill, and document existing grades and drain flows.

Fill-dirt is intended to provide mass and raise grade, not to support plant growth: it is low in organic matter and not suitable as planting soil. Use topsoil or amended garden soil for lawns, flower beds, and planting; clean fill (sand or gravel) is better when you need drainage rather than growing medium.

Compacted fill-dirt in Indiana typically weighs about 2,200 to 2,700 pounds per cubic yard (roughly 1.1 to 1.35 tons per cu yd). Use that range when planning orders and truck payloads, and remember Hello Gravel's minimum order is 3 tons; our team can help estimate loads and arrange appropriate truck sizes for your address.