Fill Dirt in Evansville, IN

Yes. Fill dirt is usually less expensive per cubic yard than processed gravel because it is unprocessed subsoil with fewer processing costs, and in the Evansville area local suppliers often price it lower. Delivery costs depend on weight and distance and are similar for both materials, but expect fill dirt to be the cheaper material overall.

Prices in the Evansville area typically run approximately $15 to $30 per cubic yard delivered, depending on source, truck access, and seasonal demand. One cubic yard covers 27 cubic feet, which will raise 100 square feet by about 3.25 inches, so it is best thought of as a bulk, inexpensive way to add grade or fill low spots.

For a common driveway example (20 ft wide by 50 ft long) a 4-inch compacted fill dirt base requires about 12.4 cubic yards. At local delivered rates of $15 to $30 per cubic yard, the fill-dirt portion would be roughly $185 to $370, not including gravel, compaction, or spreading labor.

Use this quick rule: volume cu yd = (area in sq ft * depth in feet) / 27. For 1,000 sq ft: 2u0022 = about 6.2 cu yd, 3u0022 = about 9.3 cu yd, and 4u0022 = about 12.3 cu yd. These are loose volumes; allow a small extra amount for compaction and settlement when ordering.

You can, but it is not ideal, especially with local Indiana clay. For best results grade and compact the fill dirt first, remove organic material, and add a compacted crushed-stone base or geotextile fabric before putting down gravel to reduce rutting and sinking. This approach improves drainage and the long-term performance of the gravel surface.

Fill dirt is appropriate for building up grade, filling low spots, and creating structural elevations, but it is not good for planting because it lacks organic matter. If you plan to grow grass, plants, or a garden, add a layer of topsoil on top of compacted fill dirt; for drainage-sensitive areas in Evansville's clay soils, consider engineered aggregate (crushed stone or sand) to improve permeability.

One cubic yard equals 27 cubic feet, which is roughly eight average wheelbarrow loads (wheelbarrows hold about 3 to 4 cubic feet). A full-size pickup bed typically carries about 0.5 to 1.0 cubic yard of loose fill dirt depending on truck size, bed height, and safe payload limits, so plan for 1 to 2 pickups per cubic yard in many practical cases.

Start with clean, compacted fill dirt free of vegetation and organics to establish grade. Add a layer of geotextile fabric to separate soil from stone, then install 3 to 4 inches of compacted crushed stone as a base before your wearing course of gravel; this system reduces pumping and improves drainage in heavy local clay.

You can order fill dirt through Hello Gravel by checking your zip code on our site or contacting our team; we connect you with trusted local suppliers in Evansville. Typical minimums are 3 tons (about 2 to 3 cubic yards), standard delivery is 2+ business days with next-day available for orders placed before noon CST, and delivery is by local dump trucks—confirm exact timing and any tailgate spreading request at checkout.

Using local pricing of roughly $15 to $30 per cubic yard, 1,000 sq ft requires about 6.2 cu yd at 2u0022, 9.3 cu yd at 3u0022, and 12.3 cu yd at 4u0022. That translates to approximately $93 to $370 for the delivered fill-dirt material (2u0022 = $93–$185, 3u0022 = $139–$278, 4u0022 = $185–$370), not including compaction, delivery access fees, or additional materials like topsoil or stone.