Fill Dirt in Turner County, GA

Prices depend on quantity, delivery distance, and material quality. In Turner County and south Georgia, typical delivered prices for bulk fill-dirt often fall in the range of about $15 to $45 per cubic yard, with lower unit prices for larger orders. Contact our team or enter your zip code for an exact local quote.

Hello Gravel connects you with local suppliers and haulers serving Turner County, including Ashburn and nearby towns in the south Georgia Coastal Plain. Enter your zip code on our site or call our team to see available suppliers, schedule delivery, and get material photos and timing.

Generally, fill-dirt is less expensive than processed gravel because it requires less crushing and screening. Fill-dirt is best for building up soil or backfilling, while gravel is used where drainage and a stable surface are needed; choose based on function, not just price.

A common tri-axle dump truck carries about 10 to 14 cubic yards of loose fill-dirt, depending on moisture and compaction. Using the local per-yard range, a single truckload typically runs roughly $150 to $500 delivered, but exact pricing depends on supplier rates and distance from the pit.

Most Turner County suppliers price fill-dirt in the ballpark of $15 to $45 per cubic yard delivered, depending on order size and haul distance. For small jobs, minimum order and delivery fees can increase the effective per-yard cost, so check totals at checkout.

Large retailers like Lowe's usually sell bagged topsoil and landscaping mixes, not bulk fill-dirt delivered by dump truck. For bulk delivery to Turner County properties, arrange service through Hello Gravel or a local supplier who can deliver dump-truck loads.

Fill-dirt is commonly used to raise grades and fill low spots because it compacts well and is economical for mass fill. For a finished, plantable surface you should top off compacted fill-dirt with 3 to 6 inches of topsoil; also consider compaction and drainage needs specific to south Georgia soils.

A simple way is to multiply the area (in square feet) by the desired depth (in feet) to get cubic feet, then divide by 27 to convert to cubic yards. For example, raising 100 square feet by 1 inch equals (100 x 0.0833)/27 = about 0.31 cubic yards; use our material calculator or contact our team for a precise estimate and recommended compaction allowance.