Fill Dirt in Blair Villa/Poole Creek, GA

Locally, basic fill-dirt is usually in the range of about $15 to $35 per cubic yard delivered, depending on availability and moisture content. Per-ton pricing varies with density, but expect roughly $12 to $25 per ton as a rough guide; get a tailored quote through Hello Gravel for an exact price. Minimum orders start at 3 tons and regional sourcing can affect color and texture.

Yes, untreated fill-dirt is generally cheaper per cubic yard than decorative gravel or crushed stone when your goal is to raise grade or fill depressions. Fill-dirt is intended as a subgrade material and lacks the structural properties of compacted aggregate, so choose gravel or crushed stone for driveways or load-bearing areas despite the higher cost.

Hello Gravel typically uses tri-axle dump trucks for deliveries in this area, which commonly carry about 10 to 12 cubic yards of loose fill-dirt (roughly 12 to 16 tons depending on moisture and soil type). If you need an exact truck capacity for your order or a partial load, let us know and we will match the right truck to your job.

Decide based on use: clean, low-organic fill-dirt is best for building pads, under patios, and backfill around foundations, while general fill with some finer materials is fine for yard grading. Avoid topsoil as structural fill; if you need to grow grass, plan to add topsoil over the fill-dirt. For structural or drainage-sensitive projects, request engineered or compactable fill and consult a contractor or our team.

Minor grading and small deliveries often do not require permits, but local county rules vary and projects that change drainage, exceed certain acreage, or involve retaining walls may require permits and erosion controls. Check with your county planning or building department before ordering, and tell our team about any permit requirements so we can note them on the delivery.

Fill-dirt serves as a subgrade and will not support healthy turf on its own because it typically lacks organic matter and nutrients. Plan to spread 4 to 6 inches of quality topsoil over the final graded fill before seeding or sodding. For beds or plantings, mix in topsoil or compost to improve fertility and drainage.

Use this quick formula: (Area in square feet) x (Desired depth in inches) / 324 = cubic yards. Because fill-dirt settles and compacts, order 5% to 15% extra depending on how much compaction you expect, and convert to tons with our team if you prefer pricing by ton (1 cubic yard of fill-dirt in this area typically weighs about 1.2 to 1.6 tons).

Drivers may be able to perform tailgate spreading at their discretion if the site is safe and accessible, but this service is not guaranteed. Request spreading in the Order Notes at checkout and the driver will assess on arrival whether it can be done safely. For precise grading or compaction, hire a local equipment operator.

Blair Villa/Poole Creek soils can be clayey and hold moisture, which increases settlement risk; properly compacted lifts (typically 6 to 8 inches) reduce future settling. For load-bearing areas or near foundations, use engineered fill and a compaction plan approved by an engineer. Expect some natural settling over time for simple yard grading projects and plan final elevations accordingly.

Yes. Heavy rain seasons increase moisture in local soils, making fill-dirt heavier and harder to work with; deliveries during wet periods may require rescheduling or extra hauling charges due to weight and access issues. Standard delivery is 2+ business days; next-day delivery is available for orders placed before noon CST for an additional fee. Always check site access and mention any tight drives or low-hanging lines when you order.