Gravel delivery in Fort Pierce, FL

Local prices vary, but typical delivered ranges in Fort Pierce are: crushed stone $25 to $45 per ton, pea gravel $30 to $60 per ton, and crushed shell $20 to $40 per ton. A handy conversion: most gravels weigh about 1.2 to 1.4 tons per cubic yard (commonly estimated at 1.3 tons/yd3), so multiply the per-ton price by about 1.3 to get a per-cubic-yard estimate. Final cost depends on supplier, haul distance, and any delivery or spreading fees.

Hello Gravel lists a 3-ton minimum order, which aligns with many local suppliers in the Fort Pierce area. Standard delivery is typically 2+ business days, and next-day delivery may be available for orders placed early (additional fee applies); same-day delivery is rarely available and depends on local supplier and truck availability. Contact our team or check zip code availability to see real-time options for your delivery date.

Common choices in coastal Fort Pierce are 3/4u0022 crushed stone or crushed limestone for driveways (good compaction and load-bearing), pea gravel for patios and walkways (comfortable underfoot and decorative), and crushed shell for a local coastal look and good drainage. Crushed stone locks together for stability, pea gravel drains well but can migrate without edging, and shell is abundant locally but may shift under heavy traffic. Your final choice should balance appearance, drainage needs, and traffic load.

Fort Pierce has sandy coastal soils that drain quickly but often sit over a shallow water table and occasional organic layers, which can reduce stability when saturated. Proper prep usually means removing organic topsoil, installing a 4u0022 to 8u0022 compacted base of coarser stone, and using geotextile fabric or a stabilizing grid in soft spots. For low or poorly draining areas consider underdrain pipes or increased base depth to prevent rutting and washout.

Installed costs in Fort Pierce commonly run about $2.00 to $6.00 per square foot, depending on required grading, base depth, edging type, and site access. For a 1,000 sq ft driveway that translates roughly to $2,000 to $6,000 installed; complex sites, heavy grading, or premium edging raise the price. Ask contractors for line-item quotes so you can compare base material, labor, and compaction separately.

Permit and HOA requirements vary by location—check City of Fort Pierce and St. Lucie County permitting departments as well as your HOA rules before starting work. Some municipalities require permits for driveway modifications, curb cuts, or stormwater changes, and many HOAs restrict gravel size, color, or loose gravel in driveways. We recommend contacting local building/planning offices and your HOA early to confirm allowed materials and any setback or drainage rules.

Fort Pierce’s frequent heavy rains, high humidity, and occasional hurricanes increase the chance of washout, migration, and weed growth in gravel areas. Expect to regrade and add material more often after storm events; light maintenance like raking, replenishing lost stone, and clearing runoff channels helps longevity. Choosing angular, larger stone for high-traffic areas and installing good edging reduces maintenance needs after storms.

Common retention options include concrete curbs, paver or stone edging, metal or plastic landscape edging, and heavy timber for softer edges; for severe washout use larger stones or a poured concrete curb. Underlay the gravel with a geotextile fabric and consider a geogrid or compacted crushed-stone base to stabilize the material, then use pre-emergent herbicide and spot weed control as needed. Good slope management and surface drainage are essential to prevent gravel loss during heavy rains or storm surge.

Schedule deliveries outside of the wettest months if possible and confirm truck access so local tri-axle dump trucks can reach your drop zone without crossing soft ground. Add color or texture preferences in order notes, request tailgate spreading at checkout (drivers may do it at their discretion), and measure in tons—Hello Gravel’s minimum is 3 tons. If you’re unsure, use the material calculator or contact our team for a site-specific recommendation.