Fill Dirt in Wilton Manors, FL

Delivered fill dirt in the West Florida/Wilton Manors area commonly runs between about $30 and $60 per cubic yard, depending on distance, truck access, and material quality. Local factors like seasonal demand, truckability down narrow streets, and whether the load is small or a full truck will push prices up or down. Get a delivery quote for an exact price in your zip code.

A standard tri-axle dump truck holds roughly 12 to 14 cubic yards, and a delivered load in West Florida typically costs in the range of $350 to $850. The final price depends on material type, exact yardage, driveway access, and distance from the supplier. Hello Gravel’s platform can compare local suppliers and show delivered price options.

To raise 1,000 sq ft by 2 inches you need about 6.17 cubic yards of material (1,000 x 2/12 / 27 = 6.17 yd3). We recommend ordering 5–10% extra for settling and grading, so plan to order about 6.5 to 7 cubic yards. If you expect compaction or want to raise more in some spots, add a bit more.

Most suppliers in Florida price and deliver fill dirt by the cubic yard, since volume is easier to measure for dump trucks. Some vendors quote by the ton; if so, expect roughly 1.2 to 1.6 tons per cubic yard depending on moisture and compaction. For delivery pricing, ordering by the cubic yard and filling a truckload is generally more cost-effective than many small tonnage deliveries.

Some local suppliers and haulers offer small-load deliveries or tailgate deliveries for tight-access jobs, but per-yard costs are typically higher than bulk truckloads. Hello Gravel’s minimum order is 3 tons, but we can connect you with suppliers who may do smaller drops; costs vary widely by supplier and access, so request a small-load quote. For very small jobs, renting a truck or trailer can sometimes be cheaper than paying the premium for small residential delivery.

One cubic yard covers about 324 sq ft at 1 inch depth, or about 162 sq ft at 2 inches depth. Coverage by the ton varies because weight per cubic yard depends on moisture and composition, but using cubic yards is the clearest way to plan. For driveways you should rely on cubic-yard estimates for base layers and plan for compaction and local soil conditions.

Fill dirt is fine for building up subgrade and raising grade because it’s usually free of organic matter that decomposes and causes settling. However, fill dirt is not suitable as a final planting surface — you should top-dress with several inches of topsoil before seeding or planting. For structural fills, areas with a high water table, or any significant grade change in Wilton Manors, consider engineered fill and compaction testing and check local permitting requirements.

Bulk delivery from a local quarry or producer is usually the most cost-effective per cubic yard because it minimizes handling. Recycled material can be cheaper but quality and contamination vary, so it may cost more downstream in grading or remediation. Use Hello Gravel to compare local quarry prices, delivery charges, and recycled options so you can balance price with the quality you need.

Fill dirt should not be used as the wearing surface for a driveway — use it only to raise grade under the base. A typical driveway requires 4 to 6 inches of compacted crushed stone or crusher run as the base, plus a 1 to 3 inch wearing layer (depending on surface material). In Wilton Manors’ sandy soils you may also need geotextile fabric and extra depth or drainage improvement to prevent rutting or washout.

Minimums vary: Hello Gravel’s platform lists a 3-ton minimum for online orders, but many suppliers require a full truck for the best delivered rate (a tri-axle is about 12–14 cubic yards). Delivery fees depend on distance from the source, truck access, and whether out-of-route stops are needed; expect higher per-yard fees for small loads or tight access. Request quotes for your address to see exact minimums and delivery charges.

For minor grading around a home you often do not need a permit, but significant grade changes, filling near wetlands, or any work that alters drainage may require city or county permits and inspections. Proper compaction in lifts (several inches at a time) and attention to surface drainage are important in West Florida because of the high water table and heavy rain events. If you’re unsure, check Wilton Manors/County permitting rules and consult a pro; Hello Gravel can connect you with suppliers and haulers experienced with local requirements.