Fill Dirt in Taylor Creek, FL

Delivered prices for fill dirt in the Taylor Creek area vary by supplier, distance, and material quality. Expect typical delivered rates in the Florida Region to fall roughly between $25 and $60 per cubic yard; final pricing is shown at checkout based on your zip code and order size. Hello Gravel requires a minimum order (3 tons) and shows transparent delivery fees and options before you pay. Contact our team if you need a firm quote for your address.

A common tri-axle dump truck carries about 10 to 14 cubic yards of loose fill dirt, though capacities vary by truck and material. Truckload pricing in the Taylor Creek area typically reflects the per-yard rate times load size plus haul distance and any fees, so expect a wide range depending on those factors. Hello Gravel displays per-truck or per-ton pricing at checkout so you can compare exact cost for a full truckload to your location.

To cover 1,000 sq ft you need about 6.17 cubic yards at 2", 12.35 cubic yards at 4", and 18.52 cubic yards at 6". Fill dirt typically weighs about 1.2 to 1.6 tons per cubic yard depending on moisture and composition, so those volumes equal roughly 7.4-9.9 tons (2"), 14.8-19.8 tons (4"), and 22.2-29.6 tons (6"). Order a little extra (5-10%) to allow for settlement and grading work.

Gravel and fill dirt serve different purposes: fill dirt (soil) is used to raise grade, support landscaping, and create a base that can be planted; gravel is best for drainage and as a stable base under pavers or driveways. In many Taylor Creek yards with sandy native soils and high seasonal water tables, gravel can improve drainage but will not support planting or create the same finished grade as soil. For structural fills or lawn areas you usually want compactable fill dirt or engineered fill; consult an installer or local code if the fill is near structures.

Some preparation is typically recommended: remove loose organic topsoil and vegetation where you want stable, compacted fill because organic material prevents proper compaction and can cause future settling. In Taylor Creek and much of Florida, organic layers and high water tables make proper base prep and staged compaction important for long-term stability. For small landscaping fills you may be able to place fill over existing ground, but for large raises or near foundations, get a contractor or engineer to specify prep and compaction requirements.

Hello Gravel delivers fill dirt via local dump trucks with standard delivery in 2+ business days and a next-day option for orders placed by the cutoff; drivers may offer tailgate spreading at their discretion but spreading is not guaranteed. Mechanical spreading and proper compaction are usually performed by landscapers or grading contractors; rates vary locally but expect equipment-and-operator costs in the ballpark of $75 to $200 per hour depending on crew size and gear. Ask for a site visit or local contractor estimate if you need machine spreading and compaction—those services are priced separately from material delivery.

Permitting depends on the scope of work and local regulations: small landscaping fills often do not require a permit, but larger grading, changes to drainage, work near wetlands, or fills in regulated floodplains frequently do. In Florida, county planning, water management districts, and municipal offices handle grading, stormwater, and wetland rules, so check with your local permitting office and the property deed or HOA before you start. If your project affects neighbors, roads, or flood elevations, get permits and professional guidance to avoid fines or required rework.

One cubic yard of fill dirt covers 324 sq ft at 1" depth, 162 sq ft at 2", 81 sq ft at 4", and 54 sq ft at 6". Because fill dirt in Taylor Creek typically weighs about 1.2 to 1.6 tons per cubic yard, one ton equals about 0.63 to 0.83 cubic yards, so a single ton will cover roughly 205-269 sq ft at 1" depth or about 34-45 sq ft at 6" depth. Use these conversions to estimate needs and add 5-10% extra for settlement and grading.