Fill Dirt in Sugarloaf Shores, FL

Prices vary by supplier, material quality, and distance from local quarries, but expect a typical range of about $15 to $35 per cubic yard delivered in the Florida region. Exact pricing depends on moisture content, contamination (organics or debris), and truck access—get a site-specific quote through Hello Gravel to see current local rates.

Yes — plain fill dirt is usually less expensive per cubic yard than crushed gravel because it is largely fines and locally available. However, gravel and crushed stone serve different structural purposes (drainage and load-bearing), so choose by function, not just price.

You can use gravel for applications that need drainage and structural stability, but gravel does not compact like fine fill and can leave voids under slabs or pavers. In Sugarloaf Shores, where the water table and heavy rains matter, many projects use a combination: compacted fill dirt for bulk elevation and a gravel layer for drainage where needed.

Fill dirt is subsoil with low organic matter used to raise elevations or fill voids; in Florida it is often sandier and may include small shell fragments depending on local geology. It is not topsoil and is not suitable for planting without a top layer of good gardening soil or amended topsoil.

Hello Gravel commonly uses tri-axle dump trucks that carry roughly 10 to 12 cubic yards loose per load (actual capacity varies by truck and material). If you use the example price of $20 per cubic yard, a single tri-axle load would be about $200 to $240 plus any delivery or access fees; request a quote for an exact delivered price to your address.

A full-size pickup bed can usually hold about 1 to 1.5 cubic yards when piled, but safe weight limits and even distribution matter — 1 cubic yard of fill dirt can weigh roughly 1.2 tons depending on moisture. For anything larger than a small patch, a dump-truck delivery through Hello Gravel is simpler and safer, noting our minimum order requirements.

Possibly — coastal and flood-prone areas in Florida often have local rules about grading, elevation changes, and filling near wetlands or shorelines. Check with your local building department, county permitting office, and any HOA before ordering; if you’re unsure, our team can help point you toward the right local contacts.

Place fill in thin lifts (typically 6 to 8 inches) and compact each layer to minimize future settling, especially important in Florida’s sandy soils and high-rainfall climate. If you’re raising a pad for a structure, consider professional testing and compaction equipment or ask a contractor to ensure required compaction standards are met.

For lawns, order clean fill dirt topped with 4 to 6 inches of quality topsoil or amended soil for planting; for patios or driveways you may need compactible fill with a properly graded base and then gravel or crushed stone on top. For building pads, use engineered or clean compactible fill and consult local code or an engineer; request “clean fill” in your order notes if you want minimal organics and debris.