Fill Dirt in Silver Lake, FL

Prices for fill-dirt in Silver Lake and the broader Florida region vary by supplier, quality, and trucking distance. Expect a rough delivered range of about $12 to $35 per ton (or roughly $15 to $45 per cubic yard) as a starting point, with clean, screened fill toward the higher end and loose or wetter material toward the lower end. For an exact, up-to-date price for your address, get a quote through Hello Gravel since local sourcing and delivery fees drive final cost.

A 10-yard load cost depends on per-yard price plus delivery; using the regional range above, a 10-yard delivery could run roughly $150 to $450 for material, plus any delivery fee if you are outside a supplier’s free zone. Example: at $30/yd, material is $300; add a delivery fee (often $50–$150) and you land around $350–$450. Request a quote on Hello Gravel to see exact pricing for your driveway or job site.

A standard tri-axle dump truck typically carries about 10 to 12 cubic yards of loose fill-dirt. Using the per-yard range above, a single truckload usually costs in the neighborhood of $150 to $540 for material delivered, depending on material quality and distance. Hello Gravel can quote exact truckload pricing for your Silver Lake address and tell you if multiple trucks or a smaller load is better for your project.

Costs vary with width, base depth, and labor rates, but you can estimate by breaking the job into material, hauling, spreading, and compaction. For a 20-ft long by 10-ft wide driveway with a 4-inch base, expect about 3 cubic yards of fill-dirt (see calculation below); material might be $45–$135, labor for spreading and compacting $150–$400, plus any compaction equipment rental or contractor fees—so a rough total might fall between $250 and $800. Get local contractor quotes and a Hello Gravel material quote to refine the estimate for your exact Silver Lake site.

Use this simple formula: cubic yards = (length ft x width ft x depth in) / 324. For example, a 20 ft long by 10 ft wide driveway with a 4-inch base: (20 x 10 x 4)/324 ≈ 2.47 cubic yards, so order at least 10% extra for compaction and waste (round up to 3 yd³). For weight, fill-dirt in Florida typically runs about 1.2–1.4 tons per cubic yard; using 1.3 tons/yd³, 3 yd³ ≈ 3.9 tons. Always round up and confirm density with your supplier if ton pricing is used.

The least expensive option is usually local, unprocessed fill (sandy native fill) or screened subsoil; these save money but may contain fines or organics that affect compaction and drainage. For durability, many contractors prefer a well-graded crushed stone or crusher-run base because it compacts better and sheds water; it costs more but reduces rutting and maintenance in Florida’s wet climate. If using fill-dirt to save money, insist on clean, non-organic material, proper compaction, and consider a thin crushed-stone wearing layer on top for long-term performance.

Yes, $100/hr is within a reasonable local range for a skilled crew or contractor doing spreading and compaction, though rates vary by scope and whether equipment rental is included. Some homeowners pay lower for basic labor ($50–$80/hr) while larger equipment operators or licensed contractors may charge $100–$150/hr or a per-job rate. Ask contractors for itemized bids that separate labor, machine time, and compaction to compare fairly.

Hello Gravel’s minimum order is 3 tons. Bulk discounts are often available on larger orders; ask for tiered pricing if you need multiple truckloads. Standard delivery is 2+ business days, and next-day delivery is available for orders placed before noon CST for an extra fee; same-day delivery may be possible depending on supplier availability and distance from Silver Lake.

Permit requirements depend on Silver Lake and the county regulations; some projects (driveway alterations, raising grade, or work in regulated areas) may require building, zoning, or environmental permits. Hello Gravel and most material suppliers typically do not handle permitting, so contact Silver Lake’s building or public works department before ordering. If you’re unsure, ask a local contractor or the Hello Gravel team for guidance on who to contact.

Same-day delivery is sometimes possible if a local supplier and truck are available, but it often incurs an extra fee and cannot be guaranteed. Tailgate spreading can sometimes be done by the driver at their discretion if you request it at checkout, but Hello Gravel does not guarantee spreading services; mechanical compaction almost always needs a separate contractor or equipment rental. For coordinated spreading and compaction, ask Hello Gravel when you order so we can alert suppliers and suggest local contractors.

Clear the drop zone of vehicles, low-hanging wires, and landscaping, and mark the preferred dump location with flags or stakes so the driver can see it from the road. Consider truck weight and soft Florida soils—avoid scheduling deliveries when ground is saturated or provide a firm approach to prevent ruts; protect lawns and driveways with plywood if needed. Also note that drivers will assess access and may refuse unsafe placements; request tailgate spreading at checkout but plan for a contractor to finish grading and compaction.