Fill Dirt in Pebble Creek, FL

Fill-dirt is native or non-organic soil used to raise or level ground; it usually contains little organic material and is chosen for compaction. In Pebble Creek, FL, fill-dirt is commonly used to raise low areas, build up garage/grading pads, and prepare sites for driveways or patios, but expect sandy, coarse textures and regional variation due to local geology.

Prices vary by supplier, delivery distance, and current market conditions, but a reasonable delivered range for fill-dirt in the Florida region is approximately $20 to $45 per cubic yard. For an exact delivered price to Pebble Creek, enter your zip code on Hello Gravel or request a quote since local rates, minimums, and truck availability will affect the final price.

As a ballpark estimate, 1 cubic yard could cost about $20 to $60 delivered (small orders often carry a higher per-yard rate), while 10 cubic yards is typically cheaper per yard and may run roughly $200 to $450 delivered. These are estimates—get an exact quote via Hello Gravel for your address and delivery window, since minimums and truck fees can change pricing.

Hello Gravel commonly uses tri-axle dump trucks that hold about 10 to 14 cubic yards of loose fill-dirt; end-dump trucks can carry slightly more. A single truckload price in Florida typically ranges from about $200 to $700 depending on truck size, local supplier rates, and distance; request a truckload quote through Hello Gravel to see exact pricing for Pebble Creek.

If your goal is to raise and grade soil to support turf or planting, fill-dirt is the right material and usually less expensive per cubic yard than decorative gravel. If you only need a surfacing material (drivable surface or no planting), gravel may be a better long-term choice; compare material-plus-delivery costs via Hello Gravel and consider ongoing maintenance and drainage when choosing.

Use volume = area x depth: for 1,000 sq ft you need about 6.2 cubic yards for 2 inches, 12.4 cubic yards for 4 inches, and 18.5 cubic yards for 6 inches. Convert to weight using a common estimate of about 1.2 tons per cubic yard: roughly 7.4 tons, 14.9 tons, and 22.2 tons respectively—order a little extra for compaction and settling.

Costs depend on assumptions. For a 20 ft long by 10 ft wide driveway with a 3-inch gravel layer over a 3-inch fill-dirt underlay you would need about 1.9 cubic yards of gravel and 1.9 cubic yards of fill-dirt. Expect delivered material costs for each material in the rough ranges previously noted, plus any spreading or compaction services which may be extra; ask Hello Gravel for a site-specific quote and consider hiring a local contractor for compaction and proper base preparation.

A standard pickup bed usually holds about 0.5 to 1.0 cubic yards depending on side height, so one full cubic yard may overfill the bed and is often not safe to haul loose. For small projects under about 3 to 4 cubic yards consider ordering by the yard or using a smaller delivery; for larger jobs (roughly 10+ cubic yards) ordering a truckload is usually more cost-effective—get pricing options on Hello Gravel to decide.

A 7x14 dump trailer with typical 2-foot sides holds roughly 6 to 7 cubic yards (about 150 to 200 cubic feet); actual capacity varies with side height. Renting a trailer can be cost-effective for very small loads if you already have a vehicle that can tow it, but for most jobs over a few cubic yards delivered service from Hello Gravel is usually easier and often cheaper once you factor rental fees, fuel, and time.

Most local suppliers and haulers connected through Hello Gravel offer delivery to residential sites in Pebble Creek; tailgate spreading may be available at the driver's discretion and often has an extra fee if arranged. Full grading and mechanical compaction are trade services typically provided by landscapers or contractors rather than standard truck delivery—ask Hello Gravel to help coordinate contractors or get recommendations for compaction work.

One cubic yard equals 27 cubic feet, which is about nine standard 3-cubic-foot wheelbarrow loads. It is roughly half to a full pickup bed depending on bed height, and only a fraction of a tri-axle truckload; use the volume calculations (area x depth / 27) to estimate needed yards and always add 5-10% for compaction and settling when placing your order.

Homeowners can handle small leveling jobs and simple fills, but in Pebble Creek’s sandy soils you should compact fill in lifts and manage drainage carefully to avoid settling and erosion. Hire a professional when you need precise grade control, plan to support structures or paving, require engineered compaction, or are working near foundations, utilities, and drainage features.