Fill Dirt in Parkside, FL

Prices vary by supplier and distance, but expect a delivered estimate of about $12 to $35 per cubic yard for fill-dirt in the Parkside area. This is an estimate—use Hello Gravel to get an exact, upfront quote for your zip code and delivery location.

As a ballpark, 10 cubic yards of fill-dirt in Parkside will typically run about $120 to $350 for the material and basic delivery, based on the per-yard estimate. Your final price will depend on exact material type, access conditions, and any delivery fees or minimums shown on your Hello Gravel quote.

A typical tri-axle dump truck serving Parkside holds roughly 12 to 16 cubic yards of loose fill-dirt. Multiply that volume by your per-yard price to estimate cost; for example, at $12–$35/yd3 a full load would be roughly $144 to $560 before any site-access or special delivery charges.

Covering 1,000 sq ft at 4 inches requires about 12.4 cubic yards of fill-dirt (1,000 x 4/12 = 333.3 ft3, ÷ 27 = 12.35 yd3). That’s roughly 15 to 17 tons depending on soil density; using Parkside delivery estimates, expect the material and basic delivery to run in the neighborhood of $150 to $430, with an exact price available via Hello Gravel’s quote tool.

Yes—bulk fill-dirt delivered by the yard is almost always cheaper per cubic yard than buying the same volume in bags. Savings vary, but bulk delivery can cut costs substantially (often 40% or more) once you factor labor and the number of bags needed; use Hello Gravel’s calculator to compare exact costs for your Parkside project.

You may be able to fit about 1 to 2 cubic yards in a pickup depending on bed size, but weight is the limiting factor: a cubic yard of fill-dirt can weigh roughly 2,000 to 3,000 lb, which can exceed many pickups’ payload ratings. For very small jobs pickup can be cost-effective, but for safety, legal load limits, and convenience on larger jobs we recommend delivery—get a Hello Gravel quote and check your truck’s payload before choosing pickup.

One cubic yard equals about 27 cubic feet, which is roughly nine standard 3-cubic-foot wheelbarrow loads. Pickup loads vary by truck but typically hold about 1 to 2 cubic yards. For small fixes order by the cubic yard; for larger jobs (roughly 10–12+ yards) ordering by truckload is often simpler and may reduce per-yard cost—confirm minimums and availability on Hello Gravel.

Tailgate spreading by the driver may be available at checkout, but it is done at the driver’s discretion and is not guaranteed. For professional spreading, grading, and compaction expect additional contractor costs beyond material delivery; ballpark rates for labor and equipment in the Parkside area commonly run from about $10 to $40 per cubic yard depending on site difficulty, and you should request local contractor estimates for firm pricing.

Hello Gravel has a minimum order (3 tons) and uses local suppliers, so delivery fees, truck size limits, and access restrictions in Parkside can affect price. Narrow driveways, soft ground, overhead wires, or limited turn radius may require smaller trucks or extra handling fees—add notes and photos at checkout so we can match the right supplier and truck for your property.

Standard delivery is typically 2+ business days; for best availability we suggest scheduling several days to a week ahead, especially in busy seasons. Next-day delivery is available for orders placed before noon CST for an extra fee, and weekend or after-hours deliveries may be possible for an additional charge—confirm timing and fees during checkout or with our sales team.