Fill Dirt in Myrtle Grove, FL

Prices vary by supplier and haul distance, but in Myrtle Grove expect roughly $12 to $30 per cubic yard delivered for typical fill dirt. Final price depends on moisture content, screening, and whether delivery requires a long haul or special access; Hello Gravel has a 3-ton minimum and shows delivery windows at checkout.

Yes. Fill dirt is generally cheaper because it is subsoil with less organic matter, while topsoil includes organic material and screening for planting. If you need soil for gardening, plan to buy topsoil or mix compost instead of using fill dirt alone.

Fill dirt is native subsoil used to raise grade, fill holes, or build embankments; it usually contains clay, sand, and small rock with little organic matter. In the Myrtle Grove area, local fill dirt tends to be sandier than inland clay soils, so it compacts and drains differently than garden topsoil.

Fill dirt is typically less expensive per cubic yard than most gravels because gravel is quarried, crushed, and screened for specific uses. Gravel is better for drainage, driveways, and paths, while fill dirt is chosen for grading and structural fill — pick the material based on the project, not just price.

A typical tri-axle dump truck (about 10-12 cubic yards) will cost based on the per-yard rate and delivery fees; expect roughly $150 to $400 for a single truckload in the Myrtle Grove area. Exact cost depends on supplier, distance, and whether the load is wet or needs special handling; Hello Gravel shows delivery options and fees at checkout.

Coverage depends on depth and compaction. As a rule of thumb, 1 ton of fill dirt is roughly 0.8 cubic yards and will cover about 260 sq ft at a 1-inch depth, about 130 sq ft at 2 inches, and about 43 sq ft at 6 inches; adjust for compaction and desired final grade.

It depends on truck size and moisture, but a tri-axle truck carrying 10 to 12 cubic yards of fill dirt usually holds about 12 to 18 tons. Heavier, wetter material or larger trucks will increase weight, and local road weight limits can affect truck load sizes.

Fill dirt is poor for planting because it lacks organic matter and nutrients, can compact and reduce drainage, and may settle over time causing low spots. In coastal Florida areas like Myrtle Grove, sandy fill dirt can drain quickly but still require a proper topsoil layer for lawns and plants; consider compaction and erosion control when using fill dirt.

Costs vary by load size and distance, but for a standard 10-12 yard dump truck of fill dirt expect roughly $150 to $400 delivered in the Myrtle Grove area. Quotes can change with supply, demand, and access issues; contact Hello Gravel for supplier-specific pricing and delivery scheduling.

Yes — fill dirt is commonly used for rough grading and building up low areas, but it should be added in lifts and compacted to avoid future settlement. For a final 3-6 inch finish suitable for grass or planting, cover fill dirt with a layer of topsoil or amended soil so plants have nutrients and proper texture.

Most big-box stores sell bagged soils and may offer limited bulk delivery, but they rarely supply large volumes of bulk fill dirt for major grading jobs. For bulk deliveries, local suppliers and marketplaces like Hello Gravel are often easier and more cost-effective for ordering truckloads and scheduling delivery.

A 10-yard load typically runs between about $120 and $300 depending on per-yard pricing and delivery distance in the Myrtle Grove area. Prices fluctuate by supplier, and extra fees can apply for tight access, long hauls, or next-day delivery — check Hello Gravel for live quotes.

It depends on the depth you want. For example, to cover 1,000 sq ft at 4 inches deep you need about 12.3 cubic yards (roughly 10 to 15 tons depending on material), which at Myrtle Grove rates could cost in the low hundreds to several hundred dollars delivered; always add 5-10% for compaction and grading waste.

The 70/30 rule (commonly referring to mixing about 70% topsoil with 30% compost for planting beds) is not applicable to using raw fill dirt by itself. If you must place fill dirt in planting areas, cap or mix it with topsoil and compost—using a 70/30 or similar mix—so plants get nutrients and proper structure.