Fill Dirt in Morriston, FL

Typical delivered prices in West Florida near Morriston vary with supplier distance, moisture, and load size. Expect roughly $12 to $35 per ton, which translates to about $15 to $45 per cubic yard for loose fill dirt. Check your zip code on Hello Gravel for exact local quotes and any delivery fees.

Hello Gravel connects you with local suppliers and haulers that serve the Morriston area (pop. 4,590) rather than a single yard. Enter your zip code on our site to see avaIlable suppliers, material photos, and scheduling options, or call our team for help finding a nearby source.

For West Florida conditions, use clean, low-organic fill dirt with a mix of sand, silt, and clay that drains but still compacts (commonly described as sandy-clay or clayey sand). Avoid topsoil or high-organic mixes for structural fills, since organics increase settling and weed growth in Morriston’s humid climate.

Permit and HOA rules vary by lot, especially near wetlands, floodplains, or conservation areas in Levy County. For small grading jobs you often do not need a county permit, but always check Levy County planning/building and any HOA rules before moving large volumes of fill to avoid fines or rework.

For driveways, use a well-graded blend with more coarse sand and small gravel and moderate fines to provide drainage and a stable base. For backyard grading, a cleaner fill dirt with fewer fines and low organics that compacts well is preferable; add surface topsoil only where you want grass or planting.

Use these quick rules: 1 inch of fill over 1,000 sq ft ≈ 3.09 cubic yards. Because fill dirt density varies, 1 cubic yard of loose fill dirt is roughly 1.2–1.6 tons, so 1 inch over 1,000 sq ft is about 3.7–4.9 tons. For larger areas, multiply by the area in thousands of square feet (for example, a 0.25-acre lot ≈ 10,890 sq ft needs about 33.6 yd3 or ~40–54 tons per inch).

Compact fill in lifts of 6 to 12 inches using a plate compactor for small areas or a small vibratory roller for driveways and large areas to reduce settling. Because of West Florida’s higher seasonal moisture, compact when the material is at an optimal moisture content and avoid placing wet, muddy loads that won’t compact well.

Expect some initial settling after placement; pRoper lift compaction limits long-term settlement. In Morriston’s rainy climate, erosion can occur on slopes unless you stabilize them with erosion controls, vegetation, or hardscaping, and clean, low-organic fill reduces weed pressure compared with topsoil.

Fill dirt is best for bulk grading and raising low spots but is not ideal as a finished driveway surface. Crusher run (crushed stone with fines) provides a stable, compactable base for driveways, while fill sand drains well and is suitable for backfill or drainage trenches but does not compact into a firm driving surface. Choose materials by function: fill dirt for mass fill, crusher run for bases, and sand for drainage/backfill.

Hello Gravel’s platform minimum order is 3 tons, and local tri-axle dump trucks commonly haul about 12–16 cubic yards (roughly 15–20 tons) per load. Small deliveries, tight access, or special placement requests may incur additional fees; check your delivery options at checkout or contact our team for an exact estimate.

Confirm access, mark any underground utilities, and note preferred drop location in Order Notes so drivers can plan their approach. Request tailgate spreading at checkout if desired (driver discretion only), order a little extra to allow for settlement, and contact Hello Gravel promptly if you need to change or cancel before dispatch.