Fill Dirt in Kissimmee, FL

Prices vary by supplier and project size, but delivered fill dirt in Kissimmee commonly runs in the range of $15 to $35 per ton for the material, plus any delivery fee. Hello Gravel covers delivery in many areas, but if a delivery fee applies you can expect a flat truck fee of about $50 to $200 depending on distance and access; get a local quote for an exact price.

Hello Gravel partners with local suppliers and quarries serving Kissimmee and the greater Orlando area, so the fastest way to find nearby sources is to enter your zip code on our site or contact our sales team. We can give you supplier options, material photos, and delivery estimates specific to your address.

Most suppliers use tri-axle dump trucks that deliver roughly 10 to 12 cubic yards of fill dirt per load, which typically weighs about 12 to 15 tons depending on moisture and soil type. As a rule of thumb, 1 cubic yard of fill dirt weighs about 1.2 to 1.5 tons, so you can multiply cubic yards by that range to estimate tons.

No, fill dirt is intended for building up grade and backfill, not as a finished driving surface. In Kissimmee's sandy, rainy climate you should place well-compacted fill dirt as a subgrade, then install a structural base such as crusher run or road base and a suitable wearing surface to ensure drainage and durability.

Proper compaction is critical: place fill dirt in thin lifts (about 4 to 6 inches loose) and compact each lift until firm; contractors commonly target 90% or higher relative compaction for structural fills. Small areas can be compacted with a vibratory plate compactor, while larger areas require a sheepsfoot or vibratory roller; moisture conditioning may be needed, and very wet fills should be avoided after heavy rain.

Fill dirt is used to raise grade and fill voids but lacks the load-bearing and drainage properties needed for a driveway surface. Crusher run or road base is a compactable, angular aggregate that forms a stable load-bearing layer; for driveways in Kissimmee you should use fill dirt only as subgrade, then install road base or crusher run as the structural layer and a top surfacing material for wear.

Possibly. Any work that changes lot grade, affects stormwater drainage, or impacts wetlands can require city or county permits in Kissimmee and Osceola County, and many HOAs have rules about visible surfaces and grading. Check with the City of Kissimmee, Osceola County permitting office, and your HOA before ordering large quantities to avoid delays.

Fill dirt itself will settle over time, especially in Florida's sandy, high-rainfall conditions—expect some settlement in the first year as the soil consolidates. To reduce maintenance, compact properly during installation, finish with erosion control (seed or sod, mulch, or a structural surface), and check grades and drainage after heavy storms; routine regrading or top dressing may be needed in low spots.

Screened fill dirt is reduced in rocks, large clods, and debris and is a better choice for final grading, lawn prep, and under patios or pavers. Screened material typically costs more than unscreened—often around $3 to $10 extra per ton depending on supplier and local availability—so choose screened for visible finished areas and unscreened for deep structural fill where appearance is not important.

Hello Gravel's standard delivery window is 2+ business days, with a next-day option available for orders placed before noon CST for an additional fee; minimum orders start at 3 tons. For large contractor orders or scheduled project deliveries, allow extra lead time for coordination with suppliers and truck fleets and contact our team to lock in dates and pricing.