Fill Dirt in Goldenrod, FL

Delivered prices for a 10-yard load of fill dirt in Goldenrod typically range depending on supplier distance and local availability. Expect a ballpark of $150 to $500 for a 10-yard delivered load, with lower costs when suppliers are local or when material is sold by the yard and higher costs for long hauls or heavy compaction. Get an exact quote by checking your zip code on Hello Gravel or contacting our sales team.

Fill dirt prices in West Florida vary by source and moisture content, but a common delivered range is about $12 to $45 per cubic yard. Weight-based pricing is less common for small residential orders, but note that 1 cubic yard of fill dirt is roughly 1.2 to 1.5 tons depending on moisture and compaction, so convert accordingly when suppliers quote per ton.

For a 20-foot-long single-car driveway about 10 feet wide raised 3 inches, you need roughly 1.8 to 2.0 cubic yards (20 ft x 10 ft x 0.25 ft = 50 cu ft ≈ 1.85 yd^3). That equals about 2.2 to 3.0 tons depending on moisture. Using local delivered prices, expect material costs around $40 to $90 for the fill dirt alone, plus any delivery fees; add 10-20% extra material for compaction and settling.

Fill dirt is usually cheaper per cubic yard than gravel, but it does not drain or compact for load-bearing as well as crushed stone or road base. In Goldenrod's humid climate, gravel or crushed stone is typically the better long-term choice for a driveway base because it provides drainage and stability, even if initial material cost is higher. For cost-sensitive projects, consider a thin layer of fill dirt to level areas and a gravel base for structural support.

Hello Gravel works with local suppliers who commonly set minimums and fees based on truck size and distance; our platform's minimum order is 3 tons. Delivery fees vary by supplier and zip code—many areas have free or included delivery for local loads, while remote deliveries may incur a mileage or truck fee. The checkout will show exact delivery pricing for your address, or you can call our team for details.

One 10-yard load equals about 270 cubic feet (10 yd^3). That covers roughly 3,240 sq ft at 1 inch depth, about 1,080 sq ft at 3 inches, about 540 sq ft at 6 inches, and about 270 sq ft at 12 inches. Use those examples to match your desired depth and remember to add 10-20% for compaction and grading waste.

Yes, many local suppliers offer volume discounts or better per-yard pricing for recurring deliveries and large orders. Typical tiering reduces per-yard cost as you move from small residential quantities (a few yards) to larger commercial loads (10+ yards or frequent weekly deliveries). Contact Hello Gravel sales or request a quote through the site to negotiate supplier-specific discounts based on your schedule and volume.

Assuming a 20 ft long by 10 ft wide driveway with 3 inches of fill dirt base and 3 inches of gravel topping, you'll need about 1.8 yd^3 for each layer (total roughly 3.6 yd^3) before compaction; plan on 4.5 yd^3 after waste and compaction. Using local delivered prices, expect a combined material cost roughly in the $200 to $800 range depending on material types (basic fill dirt vs higher-grade gravel), delivery distance, and supplier rates; get an exact quote through Hello Gravel for your address.

Cheaper options include picking up from local dirt pits, accepting free excavated fill from construction sites, or sourcing from neighbors doing landscaping. Trade-offs can include inconsistent quality, higher risk of organic material or debris in the soil, hauling logistics, and possible need for screening or additional processing. Hello Gravel simplifies the process by connecting you with vetted suppliers so you trade some savings for reliability and predictable delivery.

Fill dirt is typically sold by the cubic yard or by the ton; Hello Gravel shows the unit on each product listing. To calculate cubic yards, multiply length (ft) x width (ft) x depth (ft) and divide by 27. Always add 10-20% extra for compaction, grading, and waste, and convert to tons using roughly 1.2 to 1.5 tons per cubic yard if a supplier quotes weight-based pricing.