Fill Dirt in Fish Hawk, FL

In Fish Hawk you can expect delivered fill dirt to typically range from about $12 to $30 per cubic yard depending on supplier, distance, and quantity. Prices vary by site conditions, whether the material is screened, and seasonal demand; request a local quote for an exact price.

Yes—locally fill dirt is usually less expensive than screened topsoil because it is just subsoil without organic matter. If you need planting or turf, you will still want a layer of topsoil on top of fill dirt, which adds cost.

Hello Gravel typically uses tri-axle trucks that carry about 10 to 12 cubic yards loose, which for fill dirt is roughly 10 to 15 tons depending on moisture and composition. Exact tonnage varies by truck type and local material density; ask for the truck size when you get a quote.

A single tri-axle load usually falls in the range of $300 to $900 delivered, depending on yardage, haul distance, access, and any dump or disposal fees. For an accurate price, check availability for your ZIP code and request a quote through Hello Gravel.

Use this quick formula: cubic yards = (area in sq ft * depth in inches) / 324. To estimate tons, multiply cubic yards by about 1.1 (regional density varies). You can also use Hello Gravel’s material calculator for an instant estimate based on your project dimensions.

Fill dirt can be used to regrade for drainage, but Florida’s sandy subsoils drain quickly and may not hold shape without proper compaction. For long-term solutions combine engineered fill, compaction, and appropriate swales or French drains; consult a contractor for significant grade changes.

Fill dirt alone is not ideal for planting because it lacks organic matter and nutrients; use it for raising grade and add a 4-6 inch layer of screened topsoil or compost before planting. For lawns, spread topsoil over the fill and allow settling before seeding or sodding.

Yes—expect some settling after delivery and compaction, especially with loose, sandy materials common in our region. Plan for 5% to 20% settlement depending on depth and compaction; contractors often overfill slightly or wait for settlement before fine grading and planting.

Yes—many Fish Hawk Ranch communities have HOA and landscape guidelines that may limit visible grading, elevation changes, or the type of soil used. Check your neighborhood’s covenants and the county permit requirements before ordering material for significant grade changes.

Drivers may be able to perform tailgate spreading at their discretion; you can request this service at checkout. Keep in mind spreading is not guaranteed and depends on site conditions, safety, and the driver’s assessment upon arrival.

Because fill dirt density varies, a good rule of thumb is that 1 ton equals roughly 1 cubic yard. That means 1 ton will cover about 108 square feet at 1 inch depth (using the cubic yard to area conversion), but use the calculator for your exact dimensions.

For driveway subgrade use compactable fill dirt to build and shape grades, but the actual driving surface and base should include crushed stone or gravel for drainage and load-bearing. A typical approach is to place and compact fill to grade, then add a crushed stone base and surface material appropriate for driveways in Florida’s climate.