Fill Dirt in Daytona Beach, FL

Prices vary by supplier, distance, and the material blend, but Daytona Beach often benefits from lower freight costs because sand and fill materials are locally available. Expect quotes to reflect delivery logistics (driveway access, drop location) and seasonal demand; use Hello Gravel’s zip code check and calculator for an accurate quote. For larger projects, ask suppliers for truckload pricing or bulk discounts.

For general yard leveling in Daytona Beach, a clean fill dirt with some fines (small particles) that will compact is usually best; avoid organic topsoil as it decomposes and settles. For any load-bearing pads or near structures, consider engineered structural fill or compacted sand-clay blends sourced locally to account for Florida’s sandy subsoils.

Fill dirt density varies, so use a range: 1 cubic yard of loose fill dirt is roughly 1.2 to 1.6 tons depending on moisture and clay content. Example: a 10x10 area at 6 inches deep is about 1.85 cubic yards, which equals roughly 2.2 to 3.0 tons; remember Hello Gravel’s minimum order is 3 tons, so small jobs may require a full minimum order.

Sandy native soils and a high water table mean fill dirt must provide both compaction and drainage. You may need a blend with some fines for compaction near structures and coarser material or a drainage layer where water accumulates; using a geotextile and raising finished grade can also help manage groundwater.

Some settlement is normal, especially in sandy Florida soils; expect minor settling in the first year and more if organic material was mixed in. Properly staged compaction during installation reduces long-term settlement; plan to regrade low spots, add topsoil for planting, and reseed or install sod after settling stabilizes.

Topsoil is good for planting but poor for structural fill because it contains organic matter and will settle. Clean sand drains well but can be hard to compact for load-bearing uses; engineered structural fill or crushed stone provides better compaction and load support but is more expensive and may require heavier equipment.

Possibly. Small grading and yard-leveling jobs often do not need a permit, but raising grade near wetlands, altering drainage, or moving substantial volumes may require a permit from the City of Daytona Beach or Volusia County. Check local building and environmental codes and your HOA guidelines before ordering large amounts of fill dirt.

Yes. The wet season and hurricane season (roughly June through November) bring more rain and saturated ground, which can delay deliveries and make yards inaccessible to dump trucks. Schedule deliveries in drier months when possible, and plan for backup dates during the rainy season.

Hello Gravel connects you with local suppliers and haulers serving Daytona Beach; you can order by the ton or request a cubic yard estimate through our calculator. Minimum orders start at 3 tons for residential deliveries, and for larger commercial jobs you can request truckload pricing or a bulk quote from local suppliers.

Place fill in 4 to 8 inch lifts and compact each lift with an appropriate compactor to achieve uniform density; moisture control during compaction is important for best results. Grade finished surfaces with a slight slope (1-2%) away from structures, consider a gravel drainage layer or perforated pipe for wet spots, and use geotextile fabric where sandy subsoils may migrate into the fill.

Clear a defined drop zone and remove obstacles so dump trucks can access the site; soft, sandy yards may need temporary road plates or stabilized access to prevent trucks getting stuck. Request tailgate spreading at checkout if you want help moving material close to the spot, but note drivers perform spreading at their discretion and Hello Gravel cannot guarantee this service.