Fill Dirt in Baymeadows, FL

Expect delivered fill dirt in Baymeadows to run roughly $25 to $60 per cubic yard, depending on supplier, haul distance, and site access. Heavier or imported clean fill can cost more, and tight access or long haul fees raise the price. Ask for an all-in delivered price that includes tipping fees and any minimum-order charges.

Material-only, fill dirt is usually cheaper per cubic yard than compactable gravel, but it is not a good long-term driveway base because it does not drain or compact like aggregate. Gravel (crusher run or crusher-run with fines) costs more up front but typically saves money over time on grading and repairs. For driveways in Baymeadows soil and drainage conditions, contractors usually recommend gravel for base and fill dirt only for raising grade away from structures.

Installed prices (delivered and spread) typically range from about $60 to $150 per cubic yard in Baymeadows. Final cost depends on how much spreading and compaction is required, whether machinery is needed, and site access. Hello Gravel can deliver the material, but spreading and compaction may be an additional contractor charge or done at the driver's discretion if requested at checkout.

A typical tri-axle dump truck carries about 10 to 14 cubic yards of loose fill dirt. Use this quick formula: cubic yards = (area in sq ft * depth in feet) / 27. Examples: one 12-yd load covers roughly 1,000 sq ft at about 4 inches, 500 sq ft at about 8 inches, or 250 sq ft at about 16 inches.

A single tri-axle load (about 10–14 cubic yards) will commonly cost between $300 and $900 delivered in the Baymeadows area, depending on per-yard pricing, haul distance, and access. Tight access, permits, or offload complications can add fees. Ask for a truckload price and confirm truck size before scheduling.

Hourly labor rates for spreading fill dirt vary; small crews or licensed operators may charge $50 to $100 per hour in Northeast Florida, while larger crews or specialized contractors may charge more. Many contractors prefer to quote a per-yard spreading rate (for example $8 to $25 per cubic yard) or a flat project fee rather than strict hourly billing. Machinery rental (skid steer, bobcat) will add to the cost if heavy equipment is required.

Yardage: 1,000 sq ft at 3 inches needs about 9.3 cu yd; at 6 inches needs about 18.5 cu yd. Material-only (delivered) at $25–$60/yd runs about $230–$560 for 3" and $460–$1,110 for 6". Installed (delivered + spread/compact) at $60–$150/yd runs roughly $560–$1,390 for 3" and $1,110–$2,780 for 6", depending on site conditions and contractor rates.

'Poor man's concrete' usually means compacted sand and gravel used as a hard surface instead of poured concrete. Fill dirt is not suitable for this because it is fine soil with organic material that does not compact into a stable, load-bearing surface. For a compacted base in Baymeadows, use crushed stone, crusher run, or a sand/rock mix and then compact in layers for best results.

For general grading and gentle leveling, local fill dirt is fine and is commonly used to raise low spots and improve drainage. For structural pads, near foundations, or where high groundwater exists, choose engineered or clean fill (free of organics, with specified gradation) and follow compaction specs. Because Baymeadows soils can be sandy with a shallow water table in places, specify clean or engineered fill when the pad will support structures or hardscapes.

Suppliers need project address or zip code, estimated yardage, delivery access (driveway width, gate height, overhead wires), whether you need spreading or compaction, and photos of the site if possible. Typical lead times with Hello Gravel are standard delivery in 2+ business days, next-day service possible for orders placed before noon CST with a fee, and a minimum order of 3 tons. Always confirm site-specific fees like long-haul, offload difficulties, or permit needs.

Hello Gravel coordinates delivery of material only; drivers may perform limited tailgate spreading at their discretion but compaction is not guaranteed. Compaction requirements vary by use: finish-grading yards may need light compaction, while structural fills typically require mechanical compaction to engineered specs (often 90–95% Standard Proctor). For any structural or drainage-critical work in Baymeadows, hire a contractor or civil engineer to specify and perform compaction.

Use this formula: cubic yards = (area in square feet * depth in inches) / 324. Example: 1,000 sq ft to a 6-inch depth = (1,000 * 6) / 324 = about 18.5 cubic yards. Round up 5–10% for waste and settlement, and use Hello Gravel's online calculator or contact our team for help with a site-specific estimate.