Fill Dirt in Avalon, FL

Generally yes — plain fill-dirt is usually cheaper per cubic yard than decorative or crushed gravel in Avalon because it is a basic soil product without processing or color sorting. Prices vary by supplier, delivery distance, and quality; check your zip code on our site for current local rates.

In the Florida region around Avalon, typical retail ranges for basic fill-dirt are about $10 to $35 per cubic yard, depending on source, quality, and delivery distance. Final price depends on delivery fees, minimum orders (Hello Gravel minimum is 3 tons), and whether you need screened or engineered fill.

A loose cubic yard of fill-dirt in coastal Florida usually weighs roughly 1.0 to 1.3 tons, while compacted fill can be about 1.2 to 1.6 tons per cubic yard. Exact weight depends on composition (sand vs clay), moisture content, and compaction level.

Not generally — gravel and fill-dirt serve different purposes: fill-dirt (soil) is used to raise grade, support topsoil, and blend with landscaping, while gravel is used for drainage and structural base layers. For structural backfill around foundations or road base you may need engineered fill or crushed stone rather than loose fill-dirt.

A typical tri-axle dump truck in our network carries about 10 to 14 cubic yards loose, which often translates to roughly 12 to 18 tons for fill-dirt depending on moisture and compaction. Exact capacity varies by truck and local hauling rules, so confirm with your supplier at checkout.

A single dump-truck load (roughly 10–14 yards) in Avalon typically runs anywhere from about $200 to $900 depending on yardage, local material rates, fuel and hauling distance, and whether spreading is requested. For the most accurate quote, enter your zip code on Hello Gravel to see negotiated local pricing.

Most full-size pickups can carry between about 0.5 and 1.0 cubic yard of loose fill-dirt safely, depending on bed size and whether you use the tailgate. Be careful not to exceed your truck's payload rating and local road weight limits; when in doubt, order delivery by truck.

One cubic yard equals 27 cubic feet, so with a typical 3-cubic-foot wheelbarrow you should expect about 9 wheelbarrows per yard. If your wheelbarrow is smaller or you load conservatively, plan on 10–13 wheelbarrows per yard.

For small, shallow leveling projects you can often add a few inches of fill-dirt directly, but for deeper fills or structural work you should remove organic topsoil and place fill in 6-inch lifts with compaction. In Avalon, with sandy soils and a high water table, proper preparation and compaction are especially important to avoid settling and drainage problems.

'Poor man’s concrete' usually refers to compacted fill or gravel used as a cheap base instead of poured concrete; fill-dirt can be a component but is not a substitute for real concrete or engineered base under structural elements. We don’t recommend using loose fill-dirt as a foundation; use proper base materials and consult local building codes for structural work in Avalon.

Measure the area in square feet and the average depth in inches, then use this quick formula: (square feet x depth in inches) / 324 = cubic yards needed. For help, use Hello Gravel’s material calculator or call our sales team with your dimensions to get a recommended quantity.

Often yes — Avalon’s coastal, sandy soils and relatively high water table mean contractors commonly use clean fill or engineered mixes with lower organic content and controlled compaction. If you are building near the coast or raising grade significantly, check local codes and consider specifying engineered fill to meet compaction and drainage requirements.

Standard delivery is 2+ business days, and next-day delivery is available for orders placed before noon CST for an extra fee, subject to supplier availability. Drivers may offer tailgate spreading at their discretion; request it at checkout but note that spreading is not guaranteed and depends on site conditions and safety.