Fill Dirt in Argyle Forest, FL

Prices vary by supplier and quality, but in the Argyle Forest area delivered fill-dirt typically runs in the range of about $20 to $45 per cubic yard. Final price depends on source, truck access, delivery distance, and whether any fees (small-load or next-day delivery) apply. Check your zip code on Hello Gravel for exact local quotes.

Yes, fill-dirt is usually cheaper per cubic yard than decorative gravel because it is less processed. Fill-dirt is intended for grading and building up low areas, while gravel is crushed and screened for surface or drainage uses, which raises its cost.

Fill-dirt weight varies with moisture and composition, but in northeast Florida a loose cubic yard commonly weighs about 2,000 to 2,500 pounds (roughly 1 to 1.25 tons). Compacted fill can weigh more, so use these figures as a planning estimate.

A typical tri-axle dump truck used by our suppliers carries about 10 to 14 cubic yards loose, which for fill-dirt usually equals roughly 12 to 18 tons depending on density and compaction. Truck capacities and local weight limits vary, so ask your Hello Gravel quote to confirm what the local hauler will provide.

Multiply the number of cubic yards by the local per-yard price to estimate cost: for example, a 10 to 14-yard tri-axle load at $20 to $45 per yard would commonly range from about $200 to $630 before any fees. Exact pricing depends on availability, delivery distance, and scheduling options—get a zip-code quote on Hello Gravel for a firm price.

Yes—fill-dirt is commonly used for rough grading, raising low spots, and building subgrades in yards. In Florida's sandy soils you should compact in lifts, finish with a layer of topsoil for planting, and consider drainage; for final surfaces (lawns, patios, pavers) use the appropriate material on top of the fill.

One cubic yard equals 27 cubic feet and will cover about 100 sq ft at a 3.25-inch depth. Because 1 ton of fill-dirt locally is roughly 0.8 to 1.25 cubic yards, coverage per ton varies—use volume-based calculations (area x depth / 27) for accurate ordering.

Use the formula: cubic yards = (area in sq ft x depth in feet) / 27. For example, to cover 1,000 sq ft at 2 inches (0.1667 ft) you need about 6.2 cubic yards; at 4 inches you need about 12.3 cubic yards. Plug your desired depth into the Hello Gravel calculator for an exact recommendation.

Most standard pickup beds hold between about 0.5 and 1.0 cubic yard of loose material with the tailgate up; full loads or heavier materials can exceed the truck's payload rating. For safety and legal reasons, we recommend ordering by the yard or ton from a professional hauler rather than relying on personal truck transport.

It depends on wheelbarrow size, but a common homeowner wheelbarrow (about 3 to 4 cubic feet) requires roughly 7 to 9 trips to move one cubic yard (27 cubic feet). Contractor wheelbarrows that hold more will need fewer trips, so plan accordingly when estimating labor.

That depends on truck type and material density: a tri-axle dump truck commonly used locally can carry on the order of 24,000 to 36,000 pounds (12 to 18 tons) of fill-dirt, though legal axle limits and load distribution affect allowable weight. Always confirm the hauler's capacity and local weight limits before scheduling a large delivery.

Estimate cost by multiplying the truck's cubic-yard capacity by the local per-yard price. For example, a 10- to 14-yard load at $20 to $45 per yard typically runs from about $200 to $630, but your Hello Gravel quote will show accurate pricing including delivery and any applicable fees.

No—using fill-dirt as a substitute for concrete is not recommended because dirt is not engineered to provide the strength and durability of concrete. For structural or load-bearing work use a proper concrete mix or consult an engineer; fill-dirt is intended for grading and non-structural backfill only.

Contact Hello Gravel as soon as possible; we will work with the supplier and hauler to accommodate changes before processing. Tailgate spreading may be possible at the driver's discretion—request it at checkout but note there are no guarantees we can provide spreading on arrival.