Fill Dirt in Windsor, CA

Delivered fill dirt in Windsor usually ranges from about $15 to $35 per cubic yard depending on quality and source; a standard tri-axle load (about 10 to 12 cubic yards) therefore commonly runs between roughly $150 and $420. These are estimates: actual price varies with local supplier rates, haul distance, and whether material is screened or contains rocks, so get an exact quote through Hello Gravel for your zip code.

Yes — local suppliers and contracted haulers serve Windsor through Hello Gravel’s network. Standard delivery is typically 2+ business days (next-day may be available if ordered before noon CST) and delivery fees are often included or modest for nearby loads; long hauls or small orders can add a surcharge.

Fill dirt is often the cheapest material per cubic yard because it is usually unprocessed earth, but it is not a good final surface for driveways in Windsor’s climate because it compacts poorly and can rut or wash out. For driveways you usually use fill dirt only to raise or level the site, then add 6u0022 or more of compacted base gravel or crushed rock as the structural surface; that combination trades a low material cost for long-term performance.

Use area x depth / 27 to convert to cubic yards. For 20 x 20 (400 sq ft): 2u0022 ≈ 2.5 yd3, 4u0022 ≈ 5 yd3, 6u0022 ≈ 7.5 yd3. For 1,000 sq ft: 2u0022 ≈ 6.2 yd3, 4u0022 ≈ 12.4 yd3, 6u0022 ≈ 18.5 yd3. Order 5-10% extra to allow for compaction and grading.

The most affordable option is basic unscreened fill dirt or 'bank run' dirt sourced locally; it may include small rocks and native soil and is priced lower than screened or engineered fill. Keep in mind lower cost often means more settling and organic material, so pay for screening or compaction if you need a stable subgrade.

You should prepare the site: remove vegetation, large debris and organic topsoil, proof-roll and compact existing soil before placing fill dirt to reduce future settlement. Suppliers connected through Hello Gravel typically deliver material but do not guarantee site prep; drivers may offer limited tailgate spreading at their discretion, so hire a local contractor for full grading and compaction.

For driveways, use fill dirt only to raise grade or fill low spots, then place and compact 6u0022 to 12u0022 of structural base gravel on top — fill dirt should not be relied on as the surface layer. For drainage, fill dirt is not recommended because it is fine-grained and holds water; use free-draining gravel or drain rock for swales and French drains instead.

Suppliers can deliver fill dirt to Windsor, but fill dirt is not appropriate for French drains; instead ask for 'drain rock' or '3/4u0022 minus' depending on the design. Hello Gravel suppliers can deliver truckloads of drainage rock as well, so include project notes at checkout so the supplier can recommend the right material.

Costs depend on width, depth and required compaction: for example, a 20 ft long by 10 ft wide area filled to 6u0022 needs about 3.7 yd3 of material. At $15 to $35 per yd3 plus delivery, materials might run $60 to $130; with delivery fees and basic grading labor, expect a typical total in the $200 to $800 range. Get an on-site estimate for exact pricing because labor, compaction equipment and disposal of cut material greatly affect total cost.

Fill dirt installed without proper compaction will settle over months to years, causing low spots and drainage changes; expect occasional regrading and added material if not well compacted. Downsides include poor drainage, potential for weed growth if organic matter is present, and limited load-bearing capacity compared with engineered base; use compacted fill and finish with appropriate surfacing to reduce maintenance.