Fill Dirt in Rocklin, CA

Prices vary based on supplier, load size, and site conditions, but delivered fill dirt in Rocklin commonly runs in a broad range. Expect per-cubic-yard prices plus a delivery fee; larger, truckload orders usually lower the per-yard price. For an exact delivered quote for your address, check your zip code on our site or contact our team.

To raise 1,000 sq ft by 2u0022, 4u0022, or 6u0022 you need about 6.2, 12.3, or 18.5 cubic yards respectively. Hello Gravel can deliver fill dirt to Rocklin—we connect you with local suppliers and dump truck delivery is available (minimum orders apply). Use our material calculator or contact our team for help ordering the right amount.

Fill dirt is fine for adding bulk to raise grades or fill low spots, but it is not a substitute for a compacted base for driveways or surfaces that need drainage. For driveways and high-traffic areas, add a properly compacted crushed rock or base material layer for strength and drainage. For lawns or planting areas, top the fill with several inches of topsoil before seeding or sod.

A common tri-axle dump truck carries roughly 10 to 12 cubic yards. A 10-cubic-yard load covers about 1,620 sq ft at 2u0022, 810 sq ft at 4u0022, and 540 sq ft at 6u0022. Exact truck sizes and coverage vary by hauler, so confirm the truck capacity when ordering.

One ton and one cubic yard are not the same for soils; 1 cubic yard of fill dirt typically weighs around 1.1 to 1.6 tons depending on moisture and composition, so use cubic yards for ordering. Bulk delivery is almost always cheaper for projects that need multiple cubic yards; a single 50-lb bag is convenient for tiny jobs but becomes costly at scale (about 27 fifty-pound bags per cubic yard). For jobs over a few cubic yards, bulk delivery through Hello Gravel is usually the better value.

You can place fill dirt on native soil, but site prep improves results: remove vegetation, regrade as needed, check for buried utilities, and compact fill in lifts for best stability. Hello Gravel handles material delivery but does not provide installation or site prep; drivers may spread at their discretion but that service is not guaranteed. For compaction and grading, hire a local contractor if you need finished results.

No, 2 inches of fill dirt is not suitable for a driveway surface. Driveways need several inches of compacted base rock (commonly 4u0022 to 8u0022 of compactable crushed rock or aggregate base) and a proper wearing surface on top. If you are raising grade before building a 20 ft driveway, use fill dirt for bulk raising, then install and compact an appropriate crushed rock base before paving or applying surface gravel.

Costs vary widely with driveway length, width, compaction needs, and contractor rates, so we can only provide general guidance: fill dirt material cost is usually lower per cubic yard than crushed rock, but fill dirt alone will not give a stable driveway surface. Crushed rock or aggregate base has higher material and compaction labor costs but provides required strength and drainage. For an accurate project estimate, request a material-and-delivery quote from Hello Gravel and get local contractor bids for compaction and finishing.

Fill dirt is not suitable for drainage features; it can hold water and impede flow. For drainage trenches, French drains, and dry wells, use clean drainage gravel or washed rock sized for drainage. Hello Gravel supplies drainage gravel and other aggregates, but we do not perform installation—contact a contractor for drainage system design and installation.

For 1,000 sq ft: 2u0022 needs about 6.2 cubic yards (roughly 167 fifty-pound bags), 3u0022 needs about 9.3 cubic yards (roughly 251 bags), and 4u0022 needs about 12.3 cubic yards (roughly 333 bags). Hello Gravel offers bulk delivery pricing for cubic yards; bagged product is generally more expensive per cubic yard and is not typically sold through our platform, so bulk is the more economical choice for these sizes of projects.