Fill Dirt in Meadowview, CA

Prices for fill-dirt in Meadowview vary by supplier, haul distance, and season. Hello Gravel provides transparent, location-based quotes through our site — we require a 3-ton minimum and can show delivery fees and options when you enter your zip code. For an accurate number, request a quote; expect price differences between unprocessed fill and engineered fill.

Yes — plain fill-dirt (unprocessed soil) is typically less expensive per ton than decorative or crushed gravel because it requires less processing. However, fill-dirt is meant for raising and grading, not for finished surfacing; if you need a stable, well-draining surface for driveways or paths, gravel or compacted base material is usually a better long-term choice.

Coverage depends on how deep you want to place the material. As a rule of thumb in Meadowview, one ton of local fill-dirt is roughly 0.8 to 0.9 cubic yards, which will cover about 80–100 sq ft at a 3-inch depth. Always calculate by volume (area × depth) and order extra for compaction and settling.

Hello Gravel commonly delivers with tri-axle dump trucks that carry about 10–12 cubic yards. At a 6-inch depth, a full tri-axle load will generally cover roughly 540–650 sq ft; at a 3-inch depth it will cover about 1,080–1,300 sq ft. Exact coverage varies with how tightly the dirt is compacted and local material density.

It depends on the depth. For 1,000 sq ft at a 3-inch depth you need about 9.3 cubic yards, which is roughly 11–12 tons; at a 6-inch depth you need about 18.5 cubic yards, or roughly 22–23 tons. Add 10% extra to allow for compaction and minor grading adjustments.

Ordering in larger volumes from a nearby supplier is usually the most cost-effective approach, because hauling is a major part of the price. Hello Gravel works with local suppliers across California to find competitive options; scheduling delivery during off-peak days and accepting locally available fill (ask about recycled or off-spec material) can also reduce cost.

Yes — fill-dirt is commonly used to raise and regrade yards, but it should be placed in layers and compacted to minimize future settling. For lawns and planting beds, cap fill-dirt with a few inches of topsoil or imported loam, and check Meadowview grading or drainage rules if you change slopes or direct runoff toward neighbors.

Linear coverage depends on the width and depth of the area you're filling. For example, a tri-axle load (about 10–12 cubic yards) at 6-inch depth will cover roughly 540–650 sq ft — that translates to about 54–65 linear feet on a 10-foot-wide strip. Provide the width and desired depth to get an exact estimate from Hello Gravel.

Assuming a 20 ft long by 10 ft wide driveway and a 4-inch lift for grade adjustment, you need about 2.5 cubic yards, which equals roughly 3 tons — our 3-ton minimum meets that. Note that a proper driveway should have a compacted base (crushed rock) under the surface material; fill-dirt alone is not a durable wearing layer.

No. Fill-dirt is loose soil used to raise or grade ground and is not a substitute for concrete or a structural base. For load-bearing or paved surfaces you need engineered base materials and proper compaction, and sometimes concrete or asphalt depending on the application.

Properly placed and compacted fill-dirt can be permanent, but you should expect some settlement, especially in the first year after installation. Meadowview's dry summers and wet winters can affect how the soil settles and moves, so plan compaction in lifts, allow for drainage, and add extra material to account for settling.

Many full-size pickups can carry about one cubic yard of loose fill-dirt by volume, but weight is the limiting factor — one cubic yard of fill-dirt typically weighs around 1.0–1.4 tons depending on moisture. Always check your truck's payload capacity and local load limits before hauling; Hello Gravel can deliver right to your site if you prefer.

Fill-dirt is low in organic matter and not ideal as a planting medium — plants usually need a top layer of topsoil. Other downsides include potential for settlement, poor drainage if placed improperly, and dust in dry months; to avoid problems, compact in layers, protect slopes from erosion, and cap with topsoil for planting areas.

We recommend ordering an extra 5–15% depending on how deep you are placing material and whether you'll compact between lifts; 10% is a common rule of thumb. If you are filling a deep area or working with heavy clay in Meadowview, consider the higher end of that range and consult Hello Gravel for a site-specific recommendation.