Fill Dirt in Camarillo, CA

In Camarillo and the Ventura-Oxnard area, delivered screened fill dirt commonly ranges from about $10 to $35 per cubic yard or roughly $12 to $45 per ton, depending on moisture, screening, distance, and supplier. Prices vary by local availability, truckload minimums, and whether Hello Gravel or the supplier charges a delivery fee; our minimum order is 3 tons. For an accurate price, enter your zip code or request a quote so we can match you with local suppliers and current rates.

There are multiple landscape suppliers, dirt yards, and quarry partners serving the Ventura-Oxnard metro that sell bulk screened fill dirt, and Hello Gravel can connect you with them. Instead of listing specific vendors, we match your order to trusted local suppliers and contracted haulers who can deliver to Camarillo on a scheduled date. Check your zip code on our site or contact our team to see exact supplier options and delivery availability.

Camarillo’s hot, dry summers and wetter winters mean fill dirt dries out and shrinks in summer and can become soft or erode in winter storms, so moisture control is important during placement and compaction. Contractors typically place and compact fill near its optimal moisture content (not bone dry) to reach target densities; overly dry material may not compact well, and overly wet material can lose strength. Expect to schedule placement outside heavy rain windows and use erosion control (straw, silt fence) for winter work to protect newly placed fill.

Permit and testing needs depend on the scope: small spot filling and minor landscaping often do not require a grading permit, but raising large areas, altering drainage, or structural work (foundation backfill, driveway bases) commonly triggers city or county review. For engineered fills, foundation backfill, and driveway subgrades, Camarillo and Ventura County typically expect compaction to meet an engineer’s spec and may require testing (in-place density tests). Always check with the City of Camarillo Building Division or Ventura County Public Works early, and if your project is structural, plan on a geotechnical recommendation and compaction testing.

A 1/4-acre (10,890 sq ft) requires about 34 cubic yards (about 44 tons) to raise 1 inch, 101 cubic yards (about 131 tons) to raise 3 inches, 202 cubic yards (about 262 tons) to raise 6 inches, and 403 cubic yards (about 524 tons) to raise 12 inches. These estimates use 1 cubic yard ≈ 1.3 tons for typical fill dirt and assume loose placement; final needs may change for compaction, settlement, or grading losses. Use our material calculator or contact Hello Gravel for a site-specific estimate before ordering.

No, fill dirt is not recommended as a finished driveway surface in Camarillo because it compacts poorly for traffic and will rut, erode, and generate dust. Fill dirt can be used to build up or level the subgrade, but for a durable driveway you should install a compacted road base or crusher fines and a suitable surfacing layer (crushed rock, asphalt, or pavers). Contractors commonly place engineered fill and compact it to specified density, then cap with road base to make a long-lasting driveway.

Local contractors use fill dirt for grading low spots, raising yard elevation for drainage away from foundations, backfilling under patios and retaining walls, terracing slopes, and filling utility trenches. In Camarillo’s coastal valley terrain, fill dirt is also used to build berms and transition elevations between properties, always with attention to drainage and erosion control. For structural or drainage-sensitive work, crews typically follow geotech or engineering guidance.

When properly compacted as a subgrade and covered by a suitable base and surface, fill dirt can provide long-term support for driveways and landscaping; the lifespan depends on compaction quality, drainage, and traffic. As a surface material, fill dirt will degrade quickly and require frequent regrading, topping, and dust control. Routine maintenance includes checking for settlement, regrading low spots, improving drainage, and adding surfacing material as needed.

Calculate volume by measuring area and depth, converting to cubic yards (length x width x depth in feet ÷ 27); note 1 cubic yard is roughly 1.2–1.6 tons for fill dirt (we use 1.3 tons/yd as a common local estimate). Hello Gravel’s minimum order is 3 tons and most deliveries in Camarillo arrive by tri-axle dump truck; enter your zip code or contact our team for an exact quote including delivery fees and recommended overage for settlement. We also offer a material calculator on our site to simplify the math.

Plan a clear drop location that allows a dump truck to access your site safely; Hello Gravel uses local contracted haulers and typical deliveries arrive on tri-axle dump trucks. Request tailgate spreading at checkout if you want the driver to spread material, but understand this service is at the driver's discretion and not guaranteed; also protect landscaping, utilities, and finished surfaces before delivery. If your project needs staged lifts or compaction between lifts, schedule a contractor or compaction crew to be on site the day of delivery to avoid extra handling.