Fill-dirt in Clifton, AZ

Pricing for fill-dirt in Clifton varies by supplier, delivery distance, and order size. Hello Gravel shows current local rates when you enter your zip code or request a quote; our minimum order is 3 tons. Delivery fees can change for remote or low-access sites, and next-day delivery is available for orders placed before noon CST for an extra fee. For an exact price, get a quote online or contact our sales team.

Hello Gravel connects you with trusted local suppliers in the West Arizona/Clifton area who stock construction-grade fill-dirt, but supplier availability and minimums vary by location. Our platform shows which local suppliers can deliver to your address and their minimums; keep in mind Hello Gravel’s minimum order is 3 tons. If you need larger quantities or recurring deliveries, our team can help match you with suppliers that handle bulk orders. Contact customer service to see current local supplier options and MOQs.

Clifton’s arid conditions and common clay/shale soils affect both compaction and movement: dry clay can be hard to compact properly and may shrink, while wet clay can be soft and weak. Proper compaction in controlled lifts with the right moisture content is critical to reduce settling and shrink-swell behavior. In many cases contractors blend or cap fill-dirt with granular material to improve stability and drainage in Clifton’s soils.

Permit needs vary by project type and location; minor yard grading often has no permit, but grading, building pads, foundation backfill, work in rights-of-way, or changes to drainage commonly require permits. Check with Greenlee County Planning and Zoning and the Town of Clifton building department before starting work, especially for drives, retaining walls, or work near streams. If your property is in a floodplain, near utilities, or part of a subdivision, additional approvals may be required.

A quick rule is roughly 1 cubic yard of fill-dirt equals about 1.2 tons, but moisture and material mix cause variation. Examples: a small low spot of 10 cubic yards is about 12 tons; a 1-car driveway (12 ft x 100 ft) at 3 inches depth is about 11 cu yd or ~13 tons; a 2-car driveway (20 ft x 100 ft) at 4 inches is about 25 cu yd or ~30 tons; a 1,000 sq ft building pad at 6 inches is about 18.5 cu yd or ~22 tons. Use Hello Gravel’s material calculator or contact our team for a project-specific estimate.

Fill-dirt is intended mainly to raise grade, fill voids, or replace unsuitable soils and generally does not provide good drainage on its own. Crushed rock or road base is better for driveways, drainage, erosion control, and structural support because it compacts well and sheds water. In Clifton it’s common to use fill-dirt for bulk grading or backfill and then place a layer of crushed rock or road base on top where drainage and wear resistance are needed.

Deliveries to Clifton are usually by tri-axle dump truck; Hello Gravel handles scheduling with local haulers and the minimum order is 3 tons. For installation, contractors commonly use a skid-steer or loader to spread material and a plate compactor or small roller to compact lifts of 4–8 inches. You can request tailgate spreading at checkout, but drivers will only do it at their discretion for safety reasons; for large jobs consider hiring a local contractor with compaction equipment.

If fill-dirt is used as a finished surface, expect more frequent maintenance than with rock: regrading or adding material after heavy rains (especially monsoon storms) is common, often every 1–3 years depending on use. For slopes, add erosion control like mulch, seed, or rock to prevent washouts; check after storm events and repair ruts promptly. For longer life on driveways, cap fill-dirt with crusher run or gravel and perform an annual inspection and minor touch-ups as needed.