Fill Dirt in Taylor, AL

Delivered fill-dirt in the Taylor/West Alabama area most often runs between $12 and $28 per ton, depending on distance, moisture content, and how processed the material is. Smaller orders, longer hauls, or screened/clean fill will be toward the high end; local bulk deliveries and larger loads are toward the low end. Hello Gravel requires a 3-ton minimum and standard delivery is 2+ business days, with next-day options available for an extra fee.

Local suppliers include area sand and gravel pits, landscape yards, and regional aggregate companies that serve West Alabama; Hello Gravel connects you with vetted local haulers. Minimums vary by supplier and truck type, but many haulers work with a 3-ton minimum (Hello Gravel) and typical tri-axle trucks carry 10 to 14 tons — expect per-trip minimums or higher per-ton pricing on very small loads.

Fill-dirt can be used to raise grades, but on Taylor’s clay-rich soils and in heavy-rain conditions it often holds water and can settle or become unstable. For areas that need structure or drainage (driveways, under slabs, near foundations) use granular material or an engineered fill layer and proper drainage; consult a contractor or engineer for load-bearing work.

Use clean, screened fill-dirt (no organics) for general grade raising and landscaping; however, driveways and building pads should have a compactable base of crusher run or coarse aggregate beneath the fill for strength. For septic backfill, local health departments often require clean fill or specified soils — check with the county health office before ordering to ensure the material meets local rules.

Estimate volume in cubic yards first (length x width x depth in feet, divided by 27), then convert to tons using about 1.2 tons per cubic yard for typical damp fill-dirt. Example: a 20x30 area at 6u0022 depth is 11.1 yd3 ≈ 13.3 tons; raising 1,000 ft2 by 2u0022 is about 6.2 yd3 ≈ 7.5 tons. Always add 10-20% extra for compaction and settlement when ordering.

Possibly. County or city permits may be required for large fill, work in floodplain areas, changes to drainage, or projects that affect setbacks; HOAs can restrict visible changes or require specific materials. We recommend checking with Taylor or the county building department and your HOA before ordering so you meet local rules and septic or erosion-control requirements.

Fill-dirt is mostly fine soil and is intended to raise grade or fill voids; it compacts but does not provide the strong, interlocking base that crushed rock does. Crusher run is a mix of crushed stone and fines that compacts tightly and makes a durable base for driveways and pads, while bank-run is less processed but better than plain fill for structural use. For West Alabama’s clay conditions, crusher run is usually the more durable choice for load-bearing layers.

DIY costs include equipment rental (plate compactor or small skid steer) typically $80 to $300 per day; professional installation labor and equipment can run $40 to $85 per hour depending on crew and equipment. Many contractors price placement and compaction at about $5 to $15 per ton or $0.50 to $2.50 per sq ft for site prep, so preparing a 20x30 slab could range roughly $300 to $1,000 depending on depth and access. Prices vary by site conditions, access, and local labor rates in West Alabama.

Deliveries are typically made by tri-axle dump trucks; standard delivery takes 2+ business days and next-day delivery is available for orders placed before noon CST for an added fee. Drivers may be able to tailgate spread material at their discretion but there are no spreading guarantees, and tight access or soft ground can limit where trucks can dump — note placement instructions in the order and contact our team if you have special access concerns.