Fill Dirt in Woods Cross, UT

Hello Gravel requires a 3-ton minimum order for fill-dirt and uses local suppliers and dump trucks for delivery. Standard delivery requires 2+ business days, with a next-day option for orders placed before noon CST for an additional fee; local delivery fees in Woods Cross vary by supplier, truck access, and order size and can range from no fee up to a modest local delivery charge.

For Woods Cross’s freeze-thaw conditions, a clean, low-organic fill with a mix of coarse sand, small gravel, and well-graded fines performs best because it drains while allowing good compaction. Avoid high-clay mixes; contractors typically prefer a compactable granular fill or a blend labeled ‘structural fill’ under driveways and where frost heave is a concern.

Compacted fill-dirt density varies, but a practical rule is about 1.2 to 1.6 tons per cubic yard once compacted; many pros use 1.4 tons per cubic yard as a working estimate. Use our material calculator or contact Hello Gravel with your dimensions for a site-specific tonnage estimate.

Permits are often required for work that changes finished grades, affects drainage, or involves structural foundations or retaining walls; projects like new foundations or major regrading usually need a building or grading permit from Woods Cross or Davis County. Check with the Woods Cross City Building Department before you start and consult a local contractor if you need engineered fill specifications or compaction testing.

Yes; many Davis County landscaping and excavation contractors provide spreading and compaction services, and rental companies in the area offer plate compactors and rollers for DIYers. Hello Gravel can help you find local suppliers and you can request spreading at checkout, but spreading is performed at the driver’s discretion and larger compaction work is best done by a local contractor.

Clay-rich native soils and seasonal frost can increase settlement and cause frost heave if the fill is not properly drained and compacted, so untreated fill on clay or wet soil often settles and may shift over a few seasons. To reduce issues, use granular, well-draining fill, compact in thin lifts, provide surface drainage, and consider geotextile or engineered solutions for load-bearing areas.

Engineered fill typically costs more than plain fill-dirt because it includes specific aggregate blends, quality control, and sometimes testing and compaction work; as a rule of thumb, expect engineered fill and installed, tested backfill to be noticeably higher—often 1.5x to 3x the total installed cost of plain fill once you include material, delivery, and compaction. For exact pricing on your project, request a quote from Hello Gravel or local contractors since local material availability affects cost.

Yes; projects that change runoff or disturb soil near drainage ways or slopes are subject to local stormwater and erosion control rules in Woods Cross and Davis County, which may require erosion control measures, limits on exposed soil, and acceptance criteria for fill material on slopes. If you are filling near a drainage swale, creek, or steep slope, check with the city planning or stormwater office and include erosion control plans and proper material selection in your project.

For driveways and other load-bearing areas, contractors commonly aim for about 90% to 95% relative compaction (often specified as 95% of Standard Proctor) with lift thicknesses typically 6 to 8 inches for hand-operated equipment and up to 12 inches for heavy rollers. Always confirm the required percent compaction with your building inspector or engineer for structural work; testing by a geotechnical lab is often required for permit work.

Common alternatives include crushed rock, 3/4-inch base course (road base), and engineered structural fill; crushed rock and road base provide superior drainage and stability for driveways and patios but usually cost more than plain fill-dirt. Engineered fill offers the best long-term performance and predictable settlement for structural work but is the most expensive once you include material specs, testing, and compaction; choose based on budget, load demands, and permit requirements.

Measure drop zone access and note obstacles when ordering—Hello Gravel asks for delivery notes and can route the truck to the safest dump spot, but tri-axle trucks need room to maneuver and drivers will assess access on arrival. For tight sites, consider ordering smaller loads (remember the 3-ton minimum), request placement guidance in the order notes, and hire a local contractor to spread and compact to avoid multiple truck maneuvers.