Gravel in Richmond, UT

Prices vary by gravel type and supplier, but expect roughly $60 to $120 per cubic yard delivered in the Richmond area. Finer materials like pea gravel and decorative rock usually cost more, while common crushed base stone is toward the lower end. Final price depends on material, supplier, and delivery distance; Hello Gravel minimum orders start at 3 tons and standard delivery is 2+ business days.

A typical tri-axle dump (local trucks often carry about 8 to 12 cubic yards) can run roughly $600 to $1,400 delivered for pea gravel in Richmond, depending on load size and supplier. One cubic yard covers about 108 sq ft at a 3-inch depth, so a 10-yard load would cover about 1,080 sq ft at that depth. Exact truck capacity and pricing depend on local haulers and material density, so get a quote for your zip code.

The most cost-effective approach is to order materials by the cubic yard or full truckload (when you need several cubic yards) to reduce per-unit delivery costs and then hire local labor for basic spreading. For small projects, buying 50-lb bags is convenient but much more expensive per cubic yard. Use Hello Gravel to compare local supplier quotes, schedule standard delivery (2+ business days) and request tailgate spreading at checkout, remembering drivers perform spreading at their discretion.

For driveways in Richmond, a two-layer approach works well: 4 to 6 inches of crushed base (3/4u0022 minus or class II road base) for structural support, topped with 2 to 3 inches of surface stone (3/8u0022 to 3/4u0022 crushed stone or crushed gravel) for traction and appearance. The local freeze-thaw and seasonal snow mean a solid base and good drainage are important to reduce rutting. Contractors often recommend compacting the base and using edging to keep material in place.

One cubic yard of gravel weighs about 2,700 to 2,800 pounds, which equals roughly 54 50-lb bags. For a typical single-car driveway area of 200 sq ft at a 3-inch depth you would need about 2 cubic yards, or roughly 108 50-lb bags. Buying by the yard is almost always cheaper than buying many bags, and Hello Gravel has a 3-ton minimum order to consider.

Costs depend on width and depth; assuming a 20-foot-long by 10-foot-wide single-car driveway (200 sq ft) and a 3- to 4-inch finished depth, materials and delivery will often run $150 to $400, with basic labor for spreading and light grading adding $200 to $600. If you need a stronger base (4 to 6 inches) or compaction, expect higher labor and material costs. Get a local quote through Hello Gravel for a precise estimate based on the exact size and material choice.

Yes. Pea gravel is attractive but tends to migrate and wash away on slopes or with vehicle traffic, can be harder to walk on, and does not compact well, making it more likely for weeds to grow up through the surface over time. Use edging, a proper base, and a good weed barrier to reduce migration and maintenance, and consider crushed stone or angular gravel for driveways with vehicle traffic. Regional snowfall and snowplow use in Richmond can also move pea gravel if not properly edged.

You can put gravel over compacted dirt for a short-term, light-use area, but for driveways or long-term use you should install a well-draining base: geotextile fabric (where drainage or soft soils are an issue), 4 to 6 inches of crushed base, and compaction. Proper prep prevents rutting, washout, and weed growth—important in Richmond's seasonal weather. Hello Gravel supplies the materials, but compaction and installation typically require a local contractor or equipment rental.

Weeds can grow through 3 inches of gravel, especially if there is organic material in the underlying soil. To minimize weeds, install a woven geotextile fabric or heavy-duty landscape fabric, remove topsoil and weeds before placing gravel, and use a 3 to 4 inch (or deeper) stone layer with edging. You can also treat problem areas with pre-emergent herbicide before installation, and Hello Gravel customers can add notes about material and prep preferences when ordering.

Yes, there are stabilized and polymeric gravel products that bind together to form a more solid, semi-permeable surface suitable for patios, paths, or low-traffic driveways. Hello Gravel can source stabilized or polymer-treated aggregates from local suppliers in the Richmond area, but installation often requires specialized installers and equipment beyond standard dump delivery. Contact our team to check local availability and to discuss installation options and referrals for contractors who handle stabilization systems.