Fill Dirt in Providence, UT

Local prices for fill-dirt in Providence (pop. 9,230) vary by supplier, haul distance, and material quality. Expect a rough delivered range of about $12 to $30 per ton, which converts roughly to $15 to $40 per cubic yard depending on density. Exact pricing depends on local availability and truck routing, so request a quote on Hello Gravel for an up-to-date delivered price to your address.

Hello Gravel's minimum order is 3 tons, which covers most residential needs. Same-day delivery is sometimes available from local suppliers or haulers but depends on truck availability and cutoffs; next-day delivery is easier to schedule if you order before noon CST. Contact our team or request a delivery date at checkout to confirm same-day options.

In Providence's freeze-thaw environment, place fill-dirt in thin lifts (no more than 4 to 6 inches loose) and mechanically compact each lift to reduce future settling and frost heave. Improve drainage by sloping grades away from structures and avoid using wet, very fine silts near surface grade where freezing occurs. For critical areas, consider adding a coarser base layer or engineered fill and have a contractor check compaction with a plate or roller.

Raising 1,000 sq ft by 4 inches equals about 12.3 cubic yards of material, which typically weighs about 15 to 18 tons depending on moisture and density. Using local delivered price ranges of $12 to $30 per ton, material cost would be roughly $180 to $540 for the fill-dirt alone. Get an exact quote from Hello Gravel to include delivery, fees, and any minimum order charges.

Permit needs vary by project scope; small routine topping or yard grading often does not need a permit, but larger regrading, changes to drainage, work in rights-of-way, or foundation backfill commonly trigger review. Check with Providence City and Cache County building and planning departments before starting work to confirm requirements and avoid fines. If your project affects stormwater or neighbors, plan to get approvals and document drainage plans.

Fill-dirt is fine for raising low spots and general grade work, but it is not an ideal driving surface because it contains more fines and can hold moisture. For driveways you should use crusher-run, aggregate base, or engineered fill for a stable, well-draining base, then top with surface gravel. A common approach in Providence is to use fill-dirt to bring grades up, compact it, then cover with 4 to 8 inches of crusher-run for durability.

Delivery fees depend on haul distance, truck type, and order size; some local deliveries may be free while others carry fees ranging from modest flat fees to $100 or more for longer hauls. Many suppliers and haulers prefer to work within a 20 to 50 mile radius of Providence, but exact limits vary by supplier and current routing. The best way to confirm is to enter your zip code on Hello Gravel or call our team for a firm delivery fee and availability.

Yes. Providence and Cache County commonly have silty loam soils and cold winters, so pure fine fill can be prone to frost heave or long-term settlement. In low, wet, or very silty areas, contractors often use a geotextile fabric, add coarse material, or use engineered fill mixes to improve drainage and stability. Ask our team or a local contractor to review your site and recommend a blend or underlay for your conditions.

Most settling happens in the first 6 to 12 months after placement, especially through the first freeze-thaw cycle; you should expect some surface loss and plan to top up or regrade after that period. With proper lift placement and compaction you can minimize settlement, but occasional regrading and adding 1 to 3 inches of material after the first season is typical. For lawns or finish surfaces, allow time for settlement before installing hardscapes or final landscaping.

Foundation backfill typically requires engineered fill and specific compaction levels rather than generic fill-dirt, and Providence building officials may reference state or local standards for backfill material and compaction. For structural work, get a geotechnical recommendation and follow the building department's inspection schedule to meet code. If you are filling around a foundation, contact Providence building officials and consider engineered fill to meet compaction and drainage requirements.