Gravel in Texas City, TX

Prices vary by supplier and delivery, but typical local ranges are: crushed limestone $25-$50 per ton (about $35-$70 per yard), pea gravel $35-$60 per ton (about $50-$85 per yard), decomposed granite $30-$65 per ton (about $42-$90 per yard), and 57 stone $25-$50 per ton (about $35-$70 per yard). Delivery fees, minimum orders, and regional sourcing in the Texas City area can move prices up or down, so use Hello Gravel’s quote tool to see exact costs for your zip code. All figures are approximate and include only material costs; spreading or contractor labor is extra.

Hello Gravel partners with local suppliers and haulers that service Texas City; available suppliers and exact delivery fees are shown at checkout when you enter your zip code. Our platform’s standard minimum is 3 tons, standard delivery is 2+ business days with free delivery in many areas, and next-day delivery is available for orders placed before noon CST for an extra fee. If you have tight access, long driveways, or need special placement, note that in Order Notes so the dispatcher and driver can plan for any additional charges.

For Texas City’s coastal, often humid climate with heavy rain events, angular crushed stone (such as 57 stone or crushed limestone) works best because it locks together and sheds water while resisting rutting. Use a compacted base layer of larger stone for structure and a 1u0022-3/4u0022 crushed top layer for a smooth driving surface; rounded pea gravel looks nice but shifts and creates dust more easily. For better dust control and stability, choose crushed material with some fines and plan for proper drainage and edging.

Use these typical estimates (convertibility uses about 1.4 tons per cubic yard): 12x50 driveway (600 sq ft) at 3u0022 depth needs ~5.6 yd3 or about 8 tons; at 4u0022 depth expect ~7.4 yd3 or ~10.5 tons. A 20x10 parking pad (200 sq ft) at 4u0022 depth needs ~2.5 yd3 or ~3.5 tons. A 3x30 path (90 sq ft) at 2u0022 depth needs ~0.56 yd3 or ~0.8 tons; note Hello Gravel’s minimum order is 3 tons, so small projects may require a larger delivery or consolidation with another order.

Permit rules vary: some cities and counties require permits for new driveways, curb cuts, or changes that affect drainage, and many HOAs have design or material rules that cover driveways. Before ordering, check Texas City municipal codes or call the city permits office and review your HOA covenants if applicable. If you’re unsure, contact Hello Gravel or your local building department for guidance before you buy.

Contractors typically remove topsoil and vegetation, install a geotextile fabric to separate soft soils from the rock, and lay a compacted base of 4u0022-6u0022 of larger crushed stone before topping with 2u0022-3u0022 of finish gravel. Compact each layer with a plate compactor or roller and crown the surface slightly to shed water away from structures. In coastal Texas City soils, good drainage and a stable base are more important than a thick top dressing, so prioritize subgrade prep and edge restraints.

Frequency depends on traffic, drainage, and storms: many homeowners regrade or add material every 1-3 years, while heavily used driveways or sites hit by tropical storms may need attention yearly or after major rain events. Typical maintenance might mean adding 1-3 tons per year for a small driveway; delivered material costs vary but expect $30-$65 per ton for common gravels in the area, with spreading/contractor costs extra. For worst-case storm damage, expect higher labor and hauling costs; consider better base prep up front to reduce long-term maintenance.

For erosion control on slopes and concentrated flow areas near Texas City, use larger angular rock or riprap (1u0022 to 6u0022 depending on flow intensity) or 1u0022-2u0022 crushed stone for swales to slow and disperse water. For lower-speed sheet flow, smaller crushed stone with a stabilized base and vegetated check dams works well. Always size the rock to the expected flow and pair it with grade control, turf or native plantings, and energy dissipators at outlets to minimize washout.

Delivery uses tri-axle dump trucks in most cases, so street access, driveway width, overhead wires, and soft or narrow driveways can limit where the truck can tip. If the truck can’t reach the desired spot, drivers may tip at the street and additional hand-spreading or smaller equipment will be needed, which adds time and cost. Tell us about access in the Order Notes and provide photos when asked so Hello Gravel and the hauler can quote accurate delivery and placement options.

Local contractor rates vary, but for small residential jobs expect labor and equipment to add roughly $300-$1,200 depending on job size and complexity, or roughly $8-$25 per ton added to material cost for hauling and spreading. Equipment rental (skid steer, plate compactor) and operator time can drive costs higher if the truck cannot tip at the driveway and material must be moved by hand or with smaller machinery. Get written estimates from a few local contractors and factor those costs into your Hello Gravel quote so you can compare all-in prices.