Fill Dirt in Downtown, TN

A typical tri-axle dump truck load (about 10–12 cubic yards) of fill dirt delivered to Downtown, TN commonly falls in a wide range because of distance and supplier differences. Expect a delivered price range roughly from $300 to $900 per truckload in the Tennessee Region, with many jobs landing in the mid part of that range. For an exact price for your address and desired delivery date, check your zip code on our site or request a quote.

Delivered fill dirt in the Tennessee Region commonly costs between $15 and $45 per cubic yard, depending on local supply, moisture content, and delivery distance. Larger orders and standard delivery windows (2+ business days) usually bring the per-yard price down, while next-day delivery or small orders may add fees.

Fill dirt is usually cheaper per cubic yard than decorative gravel when used strictly for raising or leveling ground. Gravel can cost more and is intended for drainage and durable surfaces, so for pure grade work most Downtown homeowners find fill dirt the more cost-effective choice.

For final lawn grade, gravel is not a good substitute for fill dirt because it does not provide a planting medium for grass or support topsoil. Gravel is appropriate as a sub-base for driveways or areas that require drainage or hardening; for lawn areas, use fill dirt to set grade and then add topsoil before seeding or sodding.

Yes, fill dirt is commonly used to raise and level lawns in Downtown. To estimate how much to order, measure the area in square feet and the desired depth in inches, then use: cubic yards = (area in ft2 × depth in inches) / 324. Order at least 5–10% extra to allow for settling and grading, and remember our 3-ton minimum order when placing small orders.

Measure the length and width of the area to get square feet, decide the average depth you need in inches, then apply: cubic yards = (square feet × depth in inches) / 324. As a rule of thumb, one cubic yard covers about 108 square feet at 1 inch depth; convert to tons using an approximate weight of 1.2 tons per cubic yard for ordering and delivery planning.

For leveling before planting grass, the most cost-effective approach is usually fill dirt to build grade, topped with 2–4 inches of topsoil for planting. Gravel is more cost-effective for hard surfaces and drainage, but it is not suitable as a planting medium; choose based on whether you need a lawn (fill dirt + topsoil) or a firm, drained surface (aggregate).

Grass generally grows poorly on raw fill dirt because it lacks organic matter and nutrients. For Downtown lawns, add 2–4 inches of quality topsoil over the fill dirt before seeding or sodding to improve germination, rooting, and long-term lawn health.

Fill dirt will temporarily fill a pothole but tends to settle and fail under vehicle traffic, so it is not the best long-term repair. For potholes and driveways, a compactable aggregate or road base (crushed stone) will hold up far better and compact to a stable surface.

No natural fill dirt will harden like concrete. For a firm, traffic-bearing base use engineered aggregates such as compactable crushed stone, road base, or a prescribed aggregate mix; for a paved surface, install proper base layers and then concrete or asphalt on top.