Stone in Dayton, OH

Delivered price for common stone in Dayton typically ranges from about $35 to $60 per ton. Final price depends on stone type, quantity ordered, delivery distance, and whether next-day delivery or tailgate spreading is requested; check your zip code on our site for exact quotes.

For Dayton driveways the most common choices are 3/4u0022 crushed stone or 1u0022-1 1/2u0022 angular stone for a stable base, with a 3/8u0022 to 1/2u0022 crushed stone or stone dust topcoat for a smoother walking surface. Walkways can use smaller crushed stone (3/8u0022) or compactable fines for a firm finish; local suppliers reflect regional rock sizes so confirm available blends.

A 20x20 ft driveway is 400 sq ft. At 2u0022 depth you need about 3.3 tons (roughly 2.5 cu yd), at 4u0022 about 6.7 tons (about 5.0 cu yd), and at 6u0022 about 10.0 tons (about 7.5 cu yd). Always order 5-10% extra to allow for compaction, grading and waste, and remember Hello Gravel minimum orders start at 3 tons.

Yes—properly installed crushed stone performs well in Dayton's freeze-thaw climate because it drains and resists frost heave better than many fine soils. Performance depends on good subgrade prep, proper depth, drainage, and compaction; poorly prepared subgrades or lack of drainage are the main failure points in our region.

Material-only costs for a typical 20x20 driveway (4u0022 depth) in Dayton are commonly $235 to $400 based on delivered stone prices around $35-$60/ton. With labor, site prep, edging and compaction, installed costs usually range from about $600 to $2,400 depending on site conditions and contractor rates; get an on-site quote for accuracy.

Crushed limestone is a popular local choice in Dayton because its fines help bind the surface and compact into a firm driveway, while angular crushed stone (like trap rock or granite) offers excellent drainage and long-term durability. Crushed concrete can be economical for base layers but is variable in quality; for a reliable top surface in Dayton, crushed limestone or a well-graded crushed stone mix is usually best.

Hello Gravel works with Dayton-area suppliers and typically requires a 3-ton minimum order, with tri-axle dump trucks delivering most loads. Material types and color vary by supplier and neighborhood geology; check availability and exact delivery pricing for your zip code on our site or call our team for local supplier details.

A well-built stone driveway in Dayton typically lasts 10-30 years with periodic maintenance like regrading low spots, topping off material after heavy rains or plowing, and keeping drainage clear. Expect more frequent touch-ups in areas with heavy traffic or poor drainage; simple seasonal maintenance usually keeps a driveway serviceable for many years.

Dayton city codes generally focus on drainage, setback and impervious surface rules rather than banning stone, but HOA rules vary widely and some may require a paved surface or specific edging. Before ordering stone for a driveway, check your city zoning and HOA covenants; contractors often install edging and compact the stone to meet local expectations.

For typical Dayton soils, start with a compacted subgrade and a 4u0022 to 6u0022 compacted base of 3/4u0022 crushed stone for driveways; on poor or clayey soils or slopes over about 5%, increase base thickness to 6u0022-8u0022 and consider geotextile fabric and subdrainage. Compact material in 2u0022-3u0022 lifts with a plate compactor and provide edge restraint to prevent spreading and loss during freeze-thaw cycles.