Fill Dirt in Beavercreek, OH

In Beavercreek you can generally expect basic fill-dirt to run roughly $8 to $20 per ton delivered, depending on quantity, moisture, screening, and supplier. Hello Gravel has a $3-ton minimum; order size and local trucking distances will affect the final price. For large projects we recommend getting a quote through our site to see exact, up-to-date pricing for your zip code.

On average in the Beavercreek area one ton of basic fill-dirt typically falls between $10 and $15 per ton when delivered. Prices change with seasonal demand, moisture content, and whether the dirt is screened or contains organics, so check your quote for specifics.

A truckload cost depends on the truck size and per-ton price; a typical tri-axle delivery carries about 10 to 16 tons of fill-dirt, so at $12 per ton that load would cost about $120 to $192 plus any delivery fees. Hello Gravel shows total delivery pricing at checkout so you can see the per-load cost before you confirm.

In this region a tri-axle dump truck commonly delivers about 10 to 16 tons of fill-dirt, while smaller single-axle trucks may carry 6 to 10 tons. Exact capacity varies with the truck, the dirt's moisture and compaction, and local weight limits, so ask your supplier or check your Hello Gravel delivery details.

One ton of fill-dirt is roughly 0.7 to 0.8 cubic yards, which will cover about 240 to 260 square feet at a 1-inch depth. If you are raising grade by several inches remember that compaction and settlement mean you should order 10% to 25% extra material and plan for deeper coverage where needed.

It depends on your truck's payload rating. By volume one ton is usually less than a full cubic yard and may fit in a pickup bed, but by weight one ton is 2,000 pounds and can exceed the payload of many half-ton trucks; check your vehicle's payload capacity before loading. For safety and legal weight limits we recommend using a professional delivery through Hello Gravel if you are unsure.

The most cost-effective options are ordering bulk from local suppliers (reduces hauling distance) or reusing clean excavated soil from your site. Avoid small bagged purchases for large jobs, compare Hello Gravel quotes, and ask suppliers about unscreened or on-site excavated fill if you only need structural fill rather than screened topsoil.

Unsifted or 'fill' dirt with minimal screening is usually the least expensive and is appropriate for raising grade and backfill. If you plan to grow plants or finish the surface, choose screened topsoil or bring in a layer of topsoil because basic fill-dirt often has low organic matter and poor structure for planting.

No, fill-dirt is intended for structural fill and grade adjustments, not as a finished planting surface. It typically has low organic content and compacts, so after filling you should cap with 4 to 8 inches of topsoil or a landscaping layer before planting, sodding, or mulching.

Small deliveries for minor yard work usually do not require permits, but larger fills that change drainage, exceed local fill-height limits, or affect neighboring properties may require permits or erosion-control measures. Check with the City of Beavercreek planning or public works department before major grading to avoid compliance issues.

Because Beavercreek experiences freeze-thaw cycles and seasonal rain, compacted fill can cause poor drainage or frost heave if not installed correctly. Grade the fill to move water away from structures, include proper subdrainage where needed, and factor in compaction and settlement so finished grade stays effective over time.

Include the desired drop location, any access restrictions (gates, low-hanging lines), whether you want the driver to attempt tailgate spreading (subject to driver discretion), and any color or screening preferences. Also note if you need offloading equipment or a place to stockpile material so drivers can plan for safe delivery.