Gravel in Jacksonville, NC

In Jacksonville (Wilmington metro), a delivered dump-truck load of gravel typically contains about 10 to 14 tons (roughly 6 to 10 cubic yards), depending on truck size and material. Delivered price generally ranges from about $30 to $60 per ton, so a full tri-axle load often runs around $300 to $900. Hello Gravel has a 3-ton minimum and can provide an exact local quote and delivery window for your zip code.

Assuming a common single-car driveway width of 10 ft (that is 1,000 sq ft), you would need about 12.9 tons (≈9.3 cubic yards) at 3u0022 depth and about 17.2 tons (≈12.4 cubic yards) at 4u0022 depth. To calculate for other widths, multiply area (ft2) by depth (ft) to get cubic feet, divide by 27 to get cubic yards, then multiply by about 1.4 tons per cubic yard (density varies by material).

Cost depends on the driveway width and depth; assuming a 20 ft long by 10 ft wide driveway (200 sq ft) at 3u0022 depth, you need about 2.6 tons of gravel. Material plus delivery for a small job often runs $100 to $250, and basic compaction/installation can add $100 to $400 depending on access and labor. For an accurate local price, request a Hello Gravel quote that includes delivery and any installation options.

For a 20x20 area (400 sq ft), at 2u0022 depth you need roughly 3.5 tons and at 3u0022 about 5.2 tons. Delivered material cost typically runs $30 to $60 per ton in the area, so supply-and-deliver alone is commonly in the $100 to $325 range depending on depth and material chosen. Get a zip-code quote through Hello Gravel for an exact delivered price and available materials.

One ton of crushed gravel is roughly 0.6 to 0.8 cubic yards depending on material; at 2u0022 depth it typically covers about 80 to 100 sq ft. To calculate tons needed: area (sq ft) x depth (ft) / 27 = cubic yards, then multiply by about 1.4 tons per cubic yard to get tons. For example, 1,000 sq ft at 2u0022 needs about 8.6 tons; at 3u0022 about 12.9 tons.

In Jacksonville's coastal-plain climate you will usually want at least 3 to 4 inches of gravel for a driveway used by passenger vehicles to ensure good coverage and drainage. Two inches is generally too thin for regular driveway use and can wash out during heavy rain. For heavier vehicles or poor subgrade, consider a compacted base of crushed rock (4+ inches) topped with a 1–2u0022 wearing layer.

The cheapest option depends on quantity and labor. For moderate to large amounts, bulk delivery through Hello Gravel is often cost-competitive because it factors in local supplier and hauler rates; pickup with a trailer can save money for very small loads if you already have a vehicle and time. Contractor-supplied material plus installation is convenient but usually adds labor costs, so compare total delivered price plus your time and equipment needs before deciding.

A 7x14 dump trailer's safe payload depends on its GVWR and axle ratings, but many 7x14 trailers can carry roughly 2 to 4 tons of gravel (about 1.5 to 3 cubic yards). Exact capacity varies by trailer model and local weight limits, so check the trailer's rated payload and gross vehicle weight before loading. When in doubt, make multiple lighter trips rather than overloading.

A well-built gravel driveway in Jacksonville typically lasts 5 to 15 years before requiring major replacement, with periodic maintenance (grading, adding 1–2 inches of new gravel) every 2 to 5 years. Heavy rainfall, poor drainage, and frequent truck traffic accelerate wear, so plan for more frequent top-ups in low-lying or poorly drained spots. Regular maintenance extends life and reduces the need for full replacement.

Five tons of typical crushed gravel is roughly 3.5 cubic yards (varies by material). Spread at 2u0022 depth, 5 tons will cover about 570 to 600 sq ft; at 3u0022 it covers about 380 to 400 sq ft; at 4u0022 it covers about 285 to 300 sq ft. Use these figures to visualize quantity or enter your dimensions into Hello Gravel's material calculator for precise estimates.