Gravel in Riverside, NJ

Delivered gravel in Riverside typically ranges from about $35 to $75 per ton for common materials like crushed stone, crusher-run, and pea gravel. Final cost depends on the material type, supplier availability, haul distance, and season. Hello Gravel requires a 3-ton minimum and offers standard delivery in 2+ business days, with next-day available for an extra fee if ordered before noon CST.

For most Riverside driveways, angular crushed stone (3/4u0022) or crusher-run are best because they lock together and compact well. Pea gravel is attractive and good for low-traffic or decorative driveways but tends to shift and track more in wet, freeze-thaw conditions. Consider a geotextile fabric beneath the base if your site has soft subsoil or poor drainage.

Gravel drains much better than asphalt or concrete, which helps in heavy rain, but freeze-thaw cycles in West New Jersey can cause shifting, potholes, and rutting. Using well-graded, angular material and a proper compacted base reduces movement, and edge restraints help prevent washout after storms. Regular maintenance after big weather events will keep the surface stable.

Use this quick formula: (length ft x width ft x depth ft) / 27 = cubic yards, then multiply by about 1.4 to convert cubic yards to tons. Example estimates: a 12' x 40' driveway at 4u0022 needs roughly 5.9 cubic yards or about 8.3 tons; a 3' x 20' walkway at 2u0022 is about 0.4 cubic yards or 0.5 ton; a 12' x 12' patio at 3u0022 is about 1.3 cubic yards or 1.9 tons. Always round up for compaction and waste and check with your supplier.

Supply-only pricing (through Hello Gravel) covers material priced per ton plus delivery; installation is not included. Local contractors in the Riverside area may charge for spreading and compacting by the hour or per-ton installed, and rates vary widely based on job complexity, typically adding labor, equipment, and disposal if needed. Contact our team for local installation referrals and to compare supply-only versus installed estimates.

Upfront, gravel is the least expensive to install, asphalt is mid-range, and pavers are the most costly. Long-term, gravel requires periodic topping and regrading (every 1-3 years depending on use and weather), asphalt needs sealcoating and patching over 15-25 years, and pavers have the longest lifespan with higher initial cost but less frequent repairs. Consider drainage, maintenance willingness, and neighborhood aesthetics when choosing for Riverside.

Hello Gravel’s minimum order is 3 tons. Delivery fees vary by supplier, distance, and load size; many areas have free delivery on certain products, while others may incur a delivery charge that is quoted at checkout. Enter your zip code on our site or contact our team to get an exact delivered price for your Riverside address.

For drainage and erosion control on slopes in Riverside, use larger angular stone like #57 crushed stone for drainage or 1u0022–2u0022 riprap for steeper, higher-energy areas. Combine stone with geotextile fabric to separate the soil and prevent clogging, and consider check dams, terraces, or vegetation for additional erosion control. Local suppliers can recommend mixes suited to your slope and rainfall patterns.

Most Riverside gravel driveways need a light top-up and regrading every 1-3 years, with higher-traffic drives requiring more frequent attention. A typical top-up (for example, adding 1u0022 to a 12' x 40' driveway) is roughly 2–3 tons, so cost equals the per-ton material price plus delivery and any spreading labor if hired. Regular regrading after heavy rains and seasonal freeze-thaw will extend the time between full replenishments.

Recycled options such as crushed concrete or reclaimed asphalt are often available from Riverside-area suppliers, but availability varies by supplier and season. Recycled materials are commonly priced 10%–30% lower than virgin stone, but color, texture, and performance can differ, especially for drainage or decorative uses. If you prefer recycled or local stone, note that in Order Notes at checkout and ask for photos or specs from the supplier.