Fill Dirt in South Acton, ME

Expect a wide range: delivered fill-dirt in the West Maine (South Acton) area commonly runs about $18 to $45 per ton, which is roughly $22 to $65 per cubic yard depending on moisture and compaction (1.2-1.4 tons per cubic yard). Prices vary with local supplier, haul distance, and season, so check your zip code for an exact quote on Hello Gravel.

Hello Gravel’s minimum order is 3 tons; deliveries are typically made with tri-axle dump trucks that carry roughly 10–18 tons (depending on local equipment). Make sure driveways and drop zones have 12+ feet of overhead clearance, a firm surface that can support a heavy truck, and sufficient turn radius; if access is tight, request a delivery plan at checkout and note any obstacles.

Maine’s freeze-thaw cycles increase the chance of settlement and frost heave if fill contains organic material or is not properly compacted. Use clean, non-organic fill-dirt, place in compacted lifts, and provide good surface drainage to reduce movement; otherwise expect some settling and the need for regrading after the first seasons.

Ask for clean fill-dirt with minimal organic content and a mix that contains fines to help it compact (often described as 'engineered fill' or '3/4u0022 minus' for structural work). For driveway bases or load-bearing areas, consider specifying a granular base (crusher-run or 3/4u0022 crushed stone) instead of loose fill-dirt and confirm suppliers can meet any municipal or engineer specifications.

Measure length x width x depth in feet, divide by 27 to get cubic yards, then multiply by 1.2–1.4 to convert to tons (fill-dirt density varies with moisture). Example: raising a 50 ft by 12 ft area by 6 inches is 50x12x0.5 = 300 cu ft = 11.1 cu yd, which equals about 13–16 tons of fill-dirt.

Hello Gravel connects you to regional suppliers and local haulers serving South Acton; availability depends on season and local inventories. Standard delivery is 2+ business days, with next-day available if ordered before the cutoff; plan ahead in spring and fall when demand and limited truck access can increase lead times.

Yes. Large fills, work near wetlands or shoreland zones, or projects that change drainage can trigger town or Maine DEP rules, stormwater requirements, and setbacks. Check with South Acton town officials and the Maine DEP before major fills, and get engineered plans or permits if required.

Place fill in 6–8 inch lifts and compact each layer with a plate compactor or roller, control moisture, and match the fill type to the use (clean granular for structural work). Consider geotextile fabrics on weak subgrades, slope stabilization, and hiring a contractor for large or deep fills to ensure proper compaction and drainage in this hilly, freeze-thaw climate.

Fill-dirt is usually the cheapest for raising grade and general backfill but holds moisture and does not drain or bear loads as well as crushed stone. Crushed stone or crusher-run provides better drainage and load-bearing for driveways, while screened topsoil is for planting; choose material by function—use fill-dirt for bulk raise, stone for base, and topsoil for lawns and gardens.

Expect some settling and regrading after the first winter and then periodic maintenance every 1–3 years depending on traffic and drainage. Maintenance typically includes grading and adding 1–3 inches of material; delivered material and labor costs vary, so get a local quote through Hello Gravel for a current per-yard delivered price and contractor estimates for spreading.