Fill Dirt in Overland Park, KS

Typical delivered prices for fill-dirt in the Overland Park area usually fall in a broad range because of local sourcing and haul distance. Expect roughly $12 to $25 per ton (about $14 to $30 per cubic yard using common conversion ranges), with lower prices near suppliers and higher prices for short-notice or long-haul deliveries. For an exact price for your address and delivery date, get a quote through Hello Gravel since we show supplier- and date-specific pricing.

Hello Gravel partners with local aggregate suppliers and hauling companies across the Kansas City metro and can connect you to vendors serving Overland Park. Many suppliers accept small residential orders but Hello Gravel’s minimum is 3 tons; typical contractor minimums are often 5 to 10 cubic yards for delivery. If you need larger volumes for a job site, tell us when you order so we can match you with haulers that handle commercial loads and staged deliveries.

Kansas winters mean repeated freeze-thaw cycles that can cause poorly compacted, fine-grained fill to heave or settle. For areas subject to freezing, use low-frost-susceptible material where possible, place fill in lifts (6-8 inches loose) and compact each lift; a 90-95% Standard Proctor compaction is commonly targeted for load-bearing or paved areas. Also provide positive surface drainage to keep water from saturating the fill, which greatly reduces freeze-thaw damage.

For driveways expect a compacted structural base of crushed stone (4-8 inches) on top of properly compacted fill; the underlying fill may need 6-12 inches of compacted lifts depending on existing grades. Patios typically need 4-6 inches of compacted base plus compacted subgrade; building pads almost always require engineered fill with thicker lifts and 95% or higher compaction per an engineer. If the surface will be paved or support buildings, consult a geotechnical or civil engineer for load-specific specs.

First compute cubic yards: area in square feet multiplied by depth in feet, divided by 27 (cubic yards = area(ft2) * depth(ft) / 27). Fill-dirt weight varies, so use a conversion of about 1.1 to 1.4 tons per cubic yard depending on moisture and soil type; multiply cubic yards by that factor to get tons. Example: a 1,000 sq ft area at 6 inches (0.5 ft) deep is 1000*0.5/27 = about 18.5 cubic yards, or roughly 20 to 26 tons using the 1.1–1.4 range.

Often small amounts of fill for landscaping do not require a city permit, but changing property grades, installing retaining walls, filling near creeks, or work in floodplain areas can trigger permitting in Overland Park. Many neighborhoods also have HOA rules about altering front-yard grades or adding visible berms, so check your HOA covenants before ordering. When in doubt, contact Overland Park Building Safety or your HOA, or ask Hello Gravel to help you confirm whether a permit is likely required.

Fill-dirt is primarily native soil used to raise grades and backfill; it often contains fines that retain water and are not ideal where drainage or structural support is required. Crusher-run and quarry fines are blended crushed stone and fines that compact well and shed water better, making them a better choice for driveways and bases. Engineered fill is specified and tested for load-bearing applications and is the right choice for foundations and building pads — use fill-dirt only where structural performance and drainage are not critical or after confirmation by an engineer.

Most residential deliveries in Overland Park are done by tri-axle dump trucks that carry roughly 10–16 cubic yards; Hello Gravel lists a minimum of 3 tons. Drivers will assess access for turn radius, overhead wires, driveway slope, and neighborhood restrictions; tight access, long offload pushes, or required street permits can add fees. You can request tailgate spreading at checkout, but drivers perform that service at their discretion; mark the dump spot, clear obstructions, and disclose any tight turns when ordering to avoid delays or extra charges.

Properly placed and compacted fill-dirt under a structural base can be long-lasting, but loose or uncompacted fill will settle over months to years and may require added material. For driveways, using a compacted stone base over the fill and periodic regrading will extend service life; loose yard fill should be capped with topsoil and vegetation to control erosion. Expect to monitor new fills for settling during the first year and plan for minor touch-ups or additional material after heavy rains or freeze-thaw cycles.

Yes — placing fill near streams, steep slopes, or in mapped floodplains can increase erosion, harm water quality, and violate local regulations. Use erosion control measures like silt fence, straw mulch, and quick-seeding, maintain buffer zones from natural waterways, and avoid filling below the base flood elevation without proper permits. If your project affects slopes or drainage, consult Overland Park planning staff or a civil engineer to protect the site and comply with local rules.

Before ordering, call local utilities to mark lines, clear the drop area of cars and debris, and measure access width and overhead clearances. Tell Hello Gravel about gates, long driveways, or restricted streets so we can match the right truck and avoid extra fees; request a delivery date that allows 2+ business days lead time or next-day if ordered before noon CST for an extra fee. Finally, order about 5–15% extra to allow for compaction and grading, and add notes about preferred dump location during checkout.