Gravel in St. Maries, ID

Expect a wide range: material alone often runs about $12 to $40 per ton in the West Idaho area, with common residential mixes toward the middle of that range. Delivery and spreading add to the total; local delivery to St. Maries often adds $50 to $200 depending on distance and truck size, and tailgate spreading or compaction may carry extra fees. Hello Gravel shows transparent pricing in checkout and requires a 3-ton minimum, so check your quote for exact delivered price to your zip code.

Local suppliers serving St. Maries typically offer crushed rock (3/4u0022 and 3/4u0022 minus), pea gravel, river rock, and crusher-run (also called road base). Because materials are regionally sourced, expect granitic or metamorphic rock in the Idaho Panhandle rather than limestone in some other states. If you have a color or texture preference, add notes at checkout and our suppliers will try to match local stock.

St. Maries has cold winters and freeze-thaw cycles that can cause frost heave if the base is not prepared correctly. Use a well-graded, compacted base (crusher-run or crushed rock) and install proper drainage to reduce freeze-thaw movement. For surfaces exposed to winter moisture, compact layers and consider geotextile fabric to stabilize the subgrade and limit movement.

Multiple local quarries, landscape supply yards, and regional aggregate suppliers service St. Maries, often drawing from pits near Coeur d'Alene, Plummer, and surrounding areas. Many of these suppliers offer delivery via dump truck and some offer optional spreading and compaction at an additional cost or at the driver's discretion. Hello Gravel connects you with local suppliers and shows delivery and service options when you enter your zip code.

Common guidance: pathways 2 to 3 inches of surface gravel over a compacted base; residential driveways 4 to 6 inches of compacted surface over a 4 to 8 inch crusher-run base for heavier vehicles; steep or erosion-prone slopes may require 6 to 12 inches of structural fill and additional stabilization. Use 1.3 to 1.5 tons per cubic yard (a good rule of thumb is 1.4 tons per cubic yard) to convert cubic yards to tons; for example, a 12 ft by 50 ft driveway at 4u0022 depth is about 7.4 cubic yards or roughly 10 to 11 tons.

Crusher-run and recycled aggregates are commonly sold in the region and are widely used as a compacted base for driveways. Properly graded crusher-run is suitable for heavy vehicle access when placed at adequate thickness and compacted. Recycled products can vary in quality, so ask the supplier about gradation and compaction recommendations before using them for high-load areas.

Some local contractors offer limited workmanship warranties or seasonal maintenance plans that cover spreading, regrading, and minor repairs for a set period. Coverage typically focuses on installation workmanship, such as proper compaction and grading, rather than long-term performance which depends on use and weather. Always ask for written terms, scope, and duration before hiring and verify whether materials and hauling are included.

Permit and access rules vary by parcel: St. Maries city, Benewah County, or local HOAs may have specific requirements for driveways, culverts, and approaches to public roads. Check with St. Maries Public Works or Benewah County planning and your HOA before starting work to confirm setback, drainage, and permit needs. Also contact local utility companies to mark underground lines before digging or grading.

Prioritize directing water away from the gravel surface using swales, French drains, culverts at road crossings, and well-placed grades; on slopes, use check dams, terraces, or retaining edges to slow runoff. Near rivers or creeks, follow riparian setback rules and consider engineered solutions like rock-lined channels and plantings to stabilize banks. Use geotextile fabric under gravel in high-erosion spots to separate soil and aggregate and reduce washout.

Common add-ons include geotextile fabric, compaction with a plate or roller, tailgate spreading, and edging materials like timber, steel, or paver edging. Costs vary locally: geotextile fabric is often quoted per square yard, compaction per job may be $100 to $400 depending on size, and edging typically runs a few dollars per linear foot. Get itemized quotes so you can compare materials, labor, and delivery together.

Calculate cubic yards by multiplying length (ft) x width (ft) x depth (inches) and dividing by 324 (cubic yards = L x W x D / 324). Multiply cubic yards by roughly 1.4 to get tons for typical crushed stone. If you prefer, use Hello Gravel's material calculator or enter your project details at checkout to see recommended quantities and the required minimum order.