Fill Dirt in Lassen County, CA

Prices vary with supplier and distance, but expect roughly $10 to $30 per ton for basic fill-dirt delivered in Lassen County. A typical tri-axle dump truck holds about 10 to 14 cubic yards (roughly 12 to 17 tons), so a single truck delivered normally runs in the low hundreds to a few hundred dollars depending on haul distance and site access. For an exact price, use our online quote tool or contact Hello Gravel to get current local rates and availability.

Yes, basic fill-dirt is generally cheaper per ton than processed gravel because it requires less processing and screening. However, local factors such as hauling distance, pit availability, and the specific type of gravel (crushed stone vs pea gravel) can change the comparison, so we recommend getting quotes for both materials for your specific address.

It depends on the project: gravel is excellent where drainage and stability are needed, such as under driveways or French drains, while fill-dirt is better for building up garden beds or leveling before sod because it compacts and supports topsoil. If the goal is to support structures, pathways, or paving you may need gravel or engineered fill; for simple grade changes and planting areas, use fill-dirt. If unsure, contact our team with details about the planned finish (lawn, patio, slab) and we can recommend the right material.

Most contracted dump trucks in our network are tri-axle trucks that carry about 10 to 14 cubic yards of loose material. Fill-dirt typically weighs around 1.1 to 1.4 tons per cubic yard depending on moisture and composition, so a full truck usually ranges from about 12 to 20 tons by weight. Exact volume and weight can vary by local supplier and material moisture, so ask for the supplier’s specs if you need precise numbers for compaction or permitting.

To minimize cost, order only what you need (use our material calculator), consolidate deliveries into one larger order to avoid multiple truck rolls, and choose local suppliers to reduce haul charges. If you have a truck and time, pickup from a nearby supplier can save delivery fees, but be sure you can legally transport and properly place the material. Request multiple quotes through Hello Gravel and consider flexible delivery dates to access lower-cost haulers in the area.

Lower local prices often reflect closer supply sources (local pits or farm excavations), lower regional demand, and shorter hauling distances which reduce trucking costs. Rural areas like Susanville can also have more suppliers with bulk material available, which helps keep prices competitive, but availability can change seasonally. Always check current quotes since rates fluctuate with fuel costs and pit inventory.

Measure the area in square feet and the desired depth in inches, then use this formula: cubic yards = (area in sq ft * depth in inches) / 324. Convert cubic yards to tons using an approximate factor of 1.2 to 1.4 tons per cubic yard for fill-dirt, and remember Hello Gravel has a material calculator to automate this. Round up to allow for compaction and settling, and note our minimum order is 3 tons.

Drivers may be able to perform tailgate spreading at their discretion, but Hello Gravel does not guarantee spreading services. You can request spreading in the Order Notes at checkout, and the driver will assess safety and feasibility on arrival. For precise grading or compaction, plan to arrange professional spreading and compaction separately.

Small residential deliveries for yard leveling or garden beds typically do not require permits, but larger fills, work near waterways, changes to drainage, or grading that affects neighboring properties can trigger county permits or approval. Check with Lassen County Planning and Building or your city office before large deliveries, and provide our team with project details so we can flag potential permitting concerns. When in doubt, get a quick call to your local permitting office to avoid delays or rework.

Yes, regional fill-dirt mixes in Lassen County can include variable amounts of rock, sand, clay, and occasional organic material because materials are locally sourced. If you need screened, rock-free, or low-organic fill, request specific material notes in your order and select a screened fill or engineered product if available. We recommend inspecting a sample or asking the supplier’s description if the presence of rock or clay matters for your project.