Gravel in Firerock, AZ

Prices vary by material and supplier, but in Firerock expect about $40 to $90 per ton for common gravels. Decorative or specialty stones can be higher. Hello Gravel connects you with local suppliers for exact quotes based on your zip code and chosen material.

Coverage depends on depth. As a rule of thumb, one ton of gravel typically covers about 80–100 square feet at a 2-inch depth, or about 40–50 square feet at a 4-inch depth. For precise estimates, use our material calculator or provide your project dimensions.

It depends on your truck's payload capacity and bed volume. One ton equals 2,000 lbs, and many full-size pickups have payload limits between 1,500 and 3,000 lbs, so one ton may fit but could be close to or exceed capacity for smaller trucks. Because Hello Gravel's minimum order is 3 tons, check your vehicle's payload and safety before using a pickup for gravel.

Most tri-axle dump trucks used in our network carry roughly 12 to 20 tons of gravel, depending on truck size and local weight limits. Actual capacity varies by supplier and municipal regulations. If you need a specific truck size, contact our team and we can match your order to available haulers.

Buying bulk is generally more cost-effective for medium and large projects. Bagged gravel is convenient for small jobs but costs significantly more per ton than bulk deliveries. Keep in mind Hello Gravel’s minimum order is 3 tons, which is often the cheapest way to buy for driveways, patios, and landscaping.

Base materials like crusher-run, pit run, or road base are usually the most economical choices for driveways. They compact well and provide a stable surface before any decorative top layer. For top dressing, small crushed rock or decomposed granite are common low-cost options, but prices can vary by local availability.

A crushed 3/4u0022 to 1u0022 angular rock is a common choice for Firerock because it compacts well, sheds water, and handles desert temperature swings. Decomposed granite is popular for a natural look but may require stabilizers in high-traffic areas. Consider a compacted base layer of crusher-run topped with a decorative layer for the best balance of durability and appearance.

It depends on width and depth. For example, a 100 ft long by 12 ft wide driveway at 3 inches deep is about 11.1 cubic yards, which is roughly 15 tons of gravel using typical densities. Use our material calculator or send your exact length, width, and desired depth for a tailored estimate.

Costs vary widely based on width, depth, material type, and current local prices. As an example, a 1,000 ft by 12 ft driveway at 4 inches deep is about 148 cubic yards, or roughly 200 tons; at $50 per ton that would be around $10,000 in materials before delivery or compaction. Contact Hello Gravel for a detailed quote that reflects current local rates and delivery options.

Twenty tons of typical gravel is roughly 14 to 15 cubic yards, depending on material density. We use supplier-specific densities to give exact conversions, so provide the material type or ask our team to convert for you.

Rip rap prices in the Firerock area commonly range from about $60 to $150 per ton depending on rock size and source. Coverage depends on stone size and placement; because rip rap is bulky and irregular, one ton covers far less area than crushed gravel. For erosion control projects, we recommend a site measurement and a supplier-specific estimate to set the correct tonnage.

A tri-axle dump truck in our network can typically haul between 12 and 20 tons of rip rap, depending on rock size and local weight restrictions. Larger, heavier rock reduces cubic capacity, so exact tonnage varies by load. Contact Hello Gravel and we will coordinate a truck and supplier that fit your rip rap needs.

Cost depends on the truck's capacity and the price per ton of the material. For example, if a truck delivers 16 tons and the gravel is $60 per ton, the material would be about $960 before delivery or fees. Hello Gravel will show line-item pricing and delivery options at checkout so you can see total cost upfront.

A 7x14 trailer with typical side heights might hold about 4 to 6 cubic yards of material. For gravel at roughly 1.3–1.4 tons per cubic yard, that equals about 5 to 8 tons by weight. Actual capacity depends on side height and the trailer's payload rating, so check the trailer’s limits before loading.

Next-day delivery is available for orders placed before noon CST, subject to supplier and truck availability and additional fees. Our minimum order is 3 tons for standard deliveries. We will confirm scheduling and any extra charges during checkout and by email or text.