Gravel in Encanto Village, AZ

Delivery cost depends on material type, distance from the supplier, and truck access. Hello Gravel requires a 3-ton minimum and offers free delivery in many areas of the Phoenix metro; local delivery fees may apply for remote addresses or next-day service. For an accurate price, check your zip code on our site or get a quote—prices shown include delivery when available.

Materials that compact well and resist spreading are best, such as decomposed granite for a firm walking surface, 3/8u0022 to 3/4u0022 crushed rock for driveways, and pea gravel for decorative beds. Choose light-colored aggregates to reduce heat absorption, and consider stabilizers or a compacted base for high-traffic areas to limit movement during dry heat. Regional suppliers in the Phoenix area can recommend locally sourced options that hold up in arid conditions.

A typical 2-car driveway (about 20' wide by 20' long = 400 sq ft) at a 4u0022 compacted depth requires roughly 7 tons of 3/4u0022 crushed gravel. If your driveway is larger (for example 24' x 24' = 576 sq ft) plan on about 10 tons at 4u0022 depth. Measure your driveway and use a gravel calculator or contact our team for a precise estimate.

Permit needs vary by project and local rules in the City of Phoenix. In most cases swapping lawn or installing gravel on private property does not require a permit, but changes to driveways, curb cuts, retaining walls, or drainage may trigger permits or inspections. Check with the City of Phoenix planning and building department or your HOA before starting, and contact our team if you need help identifying likely permit triggers.

Maintenance frequency depends on traffic, the gravel type, and storm events. Expect light regrading or spot topping every 1-3 years for driveways with moderate use, and more frequent touch-ups after heavy monsoon rains; full resurfacing or adding more material is often needed every 3-5 years. Proper base preparation and compaction can extend the time between major maintenance.

Prices vary by supplier and color, but generally crushed rock is the most economical, decomposed granite is mid-range, and pea gravel tends to cost more per ton due to screening and appearance. Typical local ballpark ranges in the Phoenix area (subject to change) are: crushed rock lowest, decomposed granite mid, pea gravel highest; exact rates depend on delivery, color, and seasonal availability. For a precise comparison, request a quote for each material through Hello Gravel using your zip code.

Yes—many local landscapers and contractors in the Phoenix metro compact a gravel base, install edging, and finish patios with decomposed granite or crushed gravel. Typical installation costs vary with prep, edging, and base materials; ballpark contractor rates in the area are often in the range of $3 to $7 per sq ft for a decorative gravel patio, depending on complexity. Get multiple bids and confirm whether they include compaction, weed fabric, and edging before hiring.

For drainage, gravel generally performs better because it is permeable and allows water to infiltrate when properly installed over a permeable base. For heat, light-colored gravel reflects more solar radiation than dark asphalt and may help reduce surface temperatures, though gravel still warms under direct sun. If drainage is your priority choose a granular, permeable installation; if you need a cool, sealed walking surface, consider pavers with light colors or shading strategies.

Hello Gravel connects you with local suppliers across the Phoenix area and delivers by dump truck, typically with a 3-ton minimum order. Many local quarries and landscape yards also sell bulk material, but minimums and delivery options vary; Hello Gravel shows supplier pricing and delivery availability for your zip code. Use our online calculator to estimate tons and schedule delivery, or call the sales team for help.

Removal and replacement costs depend on access, haul-off requirements, depth of removal, and disposal fees. As a rough range, expect combined removal and installation costs of about $3 to $8 per sq ft for typical residential driveways, with simpler projects on the low end and complex jobs with haul-away or heavy equipment on the high end. Obtain onsite quotes from local contractors for accurate pricing, since estimates vary widely with site conditions and scope.