Gravel in Duncan, AZ

A typical tri-axle dump truck used for deliveries holds roughly 10-14 tons (about 7-11 cubic yards) depending on the material. Price varies by gravel type and distance from the quarry, but expect to pay the per-ton rate times the truck load plus any delivery fee; as an example, at $50 per ton a 12-ton load would be about $600 before delivery. In rural areas like Duncan, AZ, transportation can raise costs, so check availability and get a quote through Hello Gravel for an exact price.

Per-ton prices in Arizona typically range roughly $35 to $70 per ton depending on the type (pea gravel, crushed stone, base) and supplier. Remote towns such as Duncan may be toward the higher end of that range because of longer haul distances and limited local supply. For an exact, up-to-date price for your zip code, request a quote on Hello Gravel.

The cheapest options are usually ordering a larger bulk amount to lower the price per ton, choosing locally sourced or recycled materials (crushed concrete or recycled base), or picking up material yourself if a nearby supplier allows it. Delivery to rural Duncan can add cost, so compare pickup versus delivery and ask suppliers about recycled or crusher-run options. Use Hello Gravel to compare local suppliers and get transparent pricing.

Coverage depends on depth and stone type, but a good rule of thumb is that 1 ton of gravel covers about 80 to 100 square feet at a 2-inch depth. Coarser, irregular stone and loose placement will cover less area, while smaller, dense aggregate covers more. For precise needs, use a material calculator or contact Hello Gravel with your project dimensions.

No, 2 inches is generally not sufficient for a driveway. For light residential driveways you should plan on 4 inches of compacted gravel over a prepared base, and 6-8 inches for heavier vehicles or poor subgrade. Also factor in a compacted base layer and good drainage—Arizona's dry climate still requires proper preparation to avoid rutting and washouts.

Cost depends on the length and depth. For example, a 20 ft wide by 20 ft long area (400 sq ft) at 4 inches depth requires about 5 cubic yards, roughly 6-8 tons; material costs could range from about $200 to $600 plus delivery and spreading. Small jobs in Duncan may be affected by Hello Gravel's minimum order (3 tons) and rural delivery fees, so get a quote to see exact pricing for your address.

Costs vary with width and depth, but using a common example: a 100 ft long by 12 ft wide driveway (1,200 sq ft) at 4 inches depth needs roughly 15 cubic yards or about 20-25 tons of gravel. At $35-$70 per ton, material alone would be roughly $700 to $1,750, plus delivery and any spreading/compaction charges. Ask Hello Gravel for a tailored quote that factors in delivery distance and your desired material type.

A 10 cubic yard load typically weighs somewhere around 12-18 tons depending on the type of gravel. Prices for a 10-yard load vary widely by material and delivery—expect a broad estimate of several hundred to over one thousand dollars in rural Arizona. For the exact cost to your property in Duncan, request a quote on Hello Gravel since availability and haul distance strongly affect price.

Gravel mixes with fines—like crusher run or gravel with stone dust—compact very tightly and form a hard, stable surface that behaves more like a paved surface. For an even firmer surface, contractors use stabilized gravel products or add polymer or cement stabilizers that bind the stones into a concrete-like layer while retaining permeability. These options are good for driveways and paths, but ask a supplier about intended use and local climate effects before choosing one in Duncan.

Recycled crushed concrete or crusher-run (recycled base) is often cheaper than new decorative gravel and compacts into a stable surface. Decomposed granite (DG) can also be an economical, natural-looking option for paths and low-traffic driveways in arid climates like Duncan's. Each alternative has trade-offs in appearance, compaction, and maintenance, so compare costs and durability for your project.

Covering 1 acre (43,560 sq ft) depends on depth: at 2 inches you'd need about 269 cubic yards, and at 4 inches about 538 cubic yards. That translates to roughly 375-760 tons depending on material weight; at $35-$70 per ton the material cost range is roughly $13,000 to $53,000 depending on depth, stone type, and delivery distance. Because Duncan is remote, hauling can be a major portion of cost—contact Hello Gravel for a precise project estimate.