Fill-dirt in Wenatchee Heights, WA

Prices vary by supplier, distance, and load size, but fill-dirt in the Wenatchee Heights area typically runs about $15 to $40 per ton with delivery. Hello Gravel has a 3-ton minimum order and many local deliveries include free delivery—check your zip code at checkout for exact pricing and any extra fees for next-day delivery. For larger contractor loads expect per-ton rates to drop and to be quoted by weight and truck size.

A good rule of thumb is that one cubic yard of fill-dirt weighs about 1.1 to 1.4 tons, so use 1.2 to 1.3 tons per cubic yard for planning. Always add 10% to 20% extra to account for settling and compaction, and use Hello Gravel's calculator or ask our team with your project dimensions for a precise estimate.

For driveways on clay you want low-organic, well-graded structural fill or compactable granular fill rather than loose topsoil. Best practice in the Wenatchee Heights area is to place engineered fill in compacted lifts, install a geotextile fabric where needed, and finish with a 4u0022-6u0022 crushed-rock base to improve drainage and load-bearing on clay.

Yes. Hello Gravel connects you with trusted local suppliers and haulers serving the Wenatchee Heights/Yakima area and can supply contractor-grade fill-dirt by the ton or by the truckload. Enter your zip code on our site or contact our team to see available material specifications, lead times, and truck options for your job.

Fill-dirt that is not well compacted or that has poor drainage can soften, erode, or settle during heavy spring runoff and wet periods. In this area it is important to grade for positive drainage, use compacted lifts, consider adding drainage rock or pipes where runoff concentrates, and avoid placing high fills on saturated soil without proper stabilization.

Compact fill-dirt in 4u0022 to 6u0022 lifts with a plate compactor for small areas and a vibratory roller for larger areas; aim for good contact and controlled moisture. Local equipment rental options include national chains and neighborhood rental yards where you can rent plate compactors, walk-behind rollers, or small ride-on rollers—call local rental shops for availability and weight recommendations for your lift depth.

Crushed rock or road base is generally the better long-term choice for rural access roads because it provides drainage and structural support. Fill-dirt can be used to raise grade or fill low spots, but always place and compact it first then finish with several inches of crushed rock or road base to create a durable driving surface.

Permit requirements vary by city and county, but many jurisdictions require grading or fill permits if you import large volumes, alter drainage, or change elevations near setbacks or watercourses. Before ordering significant amounts of fill-dirt, check with your local planning or public works office and let Hello Gravel know if you need material spec sheets for permit submittals.

Most noticeable settlement happens within the first 3 to 12 months after placement, especially through wet-dry cycles, and you should plan to check and top up low spots after the first season. Proper compaction during installation greatly reduces maintenance; expect to inspect yearly and regrade or add material as needed until the area stabilizes.

Hello Gravel's minimum order is 3 tons for residential deliveries, and fill-dirt in the Wenatchee Heights area commonly falls in the $15 to $40 per ton range depending on local supply and haul distance. For larger jobs truckload pricing (tri-axle or 10-12 ton loads) can lower the per-ton cost; check your zip code on our site for exact quotes and available delivery windows.